Intellijel TPS80W Triple Power Supply – 80W 3U / 6U busboard

admin — Fri, 18 Oct 2019 06:32:59 +0000

Serious power supply for serious eurorack case. Intellijel TPS80W shines with high stability, precision and very low noise emission. Its technical specifications are impressive as well. The TPS80W delivers up to 3 A at +12 and -12 V plus 1.5 A at +5 V. Up to 20 modules can be connected directly to board.
Protection circuits guard the modular system against short circuits, overvoltage and other nasty stuff. The output voltage accuracy is at +/-1 %.
In other words: If you need a beefy, reliable power supply, the TPS80W is the right choice!

To work properly it requires 90W power adapter. We recommend this adapter : GST90A15-P1M

DETAILS

• 80 Watt integrated switching power supply

• Low impedance star distribution due to 4 layer PCB

• +12V output at 3000 mA, -12V output at 3000 mA, +5V output at 1500 mA

• Triple 120° phased controller for low induced noise

• Output short circuit protection and foldback current limiting

• Output overvoltage protection from transient overshooting

• Soft start for controlled start up operation

• +/-1% output voltage accuracy

• Fits comfortably in an 84HP 3U case or 6U case and larger

• 34cm wide x 8cm tall and max height of 20mm.

• Mounting holes can be used with 0.157″ / 4mm PEM snaps for quick install.

Doepfer A-100 PSU3 +12V/2A, -12V/1.2A, +5V/4A, 100…240V

admin — Sun, 29 Apr 2018 06:42:48 +0000

The Doepfer PSU3 is a completely assembled and tested eurorack power supply unit that works with a wide range of input voltages 100-240V. Which means that you can power your eurorack case in any country all over the world.
We recommend to use it with maximum 2 bus boards, up to 35-40 eurorack modules (assuming average 40-50mA draw current per module)

POWER:
Doepfer PSU3 delivers:
+12V: 2000 mA
+5 V: 4000 mA
-12 V: 1200 mA

DIMENSIONS:
length: 200 mm
width: 80 mm
height: 40mm
The PSU3 has spacers attached to the bottom of the PCB and comes with mounting screws and spare fuses.

A100 PSU3 wiring: Download wiring instruction
A100 PSU3 measures: Download A100 PSU3 measures

ATTENTION! Please be aware that the power supply carries high mains voltage (110 -230V AC). All mains connections /installation should be carried out by a competent qualified person.

DOEPFER – ModularSynthLab

Intellijel TPS80W Triple Power Supply – 80W 3U / 6U busboard

Doepfer A-100 PSU3 +12V/2A, -12V/1.2A, +5V/4A, 100…240V