Material: Plastic/Steel
Complete Handle

Key Product Features:

• Dish Width: 87mm / 3.42
• Dish Height: 89mm / 3.5
• Dish Depth: 13mm / 1/2
• Offset: None
• Lockable: No
• Finish: Black Powder Coated
• Material: 1.2mm / 18 gauge Steel
• Weight: 0.13kg / 0.29lb

Installation Details:

• Panel Cut-Out Size:
  • Cut-Out Width: 65mm / 2 9/16
  • Cut-Out Height: 41.5mm + 22.5mm / 1 5/8 + 7/8
• From Split to Hole Centre:
  • Small Half: 10mm / 3/8
  • Large Half: 12mm / 1/2
• Mounting Holes: 8 x 5.2mm / 3/16
• Rivets or screws required for Installation: 8

DETAILS

• Packed in sets of 10 pieces
• Thread: M5
• Thread length: 20mm
• Total screw length:
• Type of head: Countersunk
• Type of cut: Imbus
• Cut size: HEX 3mm
• Material: Steel
• Plating material: Black finish
• Head height:
• Head diameter:
• Strength class 10.9

3U Eurorack Side Brackets_Aluminium

Eurorack side panels provide guidance for your rails to form a correctly sized 3U frame.  Therefore fixing the rails and modules inside your case will be very easy. By combining together a few frames you can create a case of any case size you need. Therefore our side cheeks are perfect hardware for any of your DIY eurorack modular synthesizers. Panels are designed to work with Doepfer-style mounting rails with lips.
The construction of the brackets is laser-cut aluminum in silver color.

Why aluminium side panels?

• Aluminium side brackets are much stiffer than plastic ones. We recommend using aluminum side brackets for constructions where additional stiffness is a necessary factor – plastic cases, leather suitcases, etc.
• Aluminium side brackets can be used with rails of any length. We especially advise using aluminum side brackets, with longer rails – over 126HP – for extra rigidity.

Assembly

The assembly process of a 3U frame using these 3U Eurorack Side Brackets is very easy: Align the holes in the bracket with a mounting groove in the profile. The top edge of the side bracket has to match the top edge of the rail lip – if those two elements don’t align, flip the side bracket for 180° degrees.  Fix both elements together with self-tapping M5 bolts. To make sure that rails are properly spaced and prevent them from rotating during assembly – put any 3U module between the rails before tightening the bolts.

Important

• The listing price is per pair of 3U Eurorack Side Brackets
• Screws and bolts are NOT INCLUDED
• Brackets are designed to work together with our eurorack rails with lips.

Construction Details

• Material: 3mm thick aluminum, silver color.
• Size: 133 x 30,5 x 3 mm
• Every side bracket has countersunk smaller holes for attaching the frame to the eurorack case with 3mm screws (screws not included)
• Every side bracket has countersunk larger holes for attaching the rails to the side panel with M5 bolts (bolts not included)

6U Eurorack Side Brackets_Aluminium

Eurorack side panels provide guidance for your rails to form a correctly sized 6U frame.  Therefore fixing the rails and modules inside your case will be very easy. By combining together a few frames you can create a case of any case size you need. Therefore our side cheeks are perfect hardware for any of your DIY eurorack modular synthesizers. Panels are designed to work with Doepfer-style mounting rails with lips.
The construction of the brackets is laser-cut aluminum in silver color.

Why aluminium side panels?

• Aluminium side brackets are much stiffer than plastic ones. We recommend using aluminum side brackets for constructions where additional stiffness is a necessary factor – plastic cases, leather suitcases, etc.
• Aluminium side brackets can be used with rails of any length. We especially advise using aluminum side brackets, with longer rails – over 126HP – for extra rigidity.

Assembly

The assembly process of a 6U frame using these 6U Eurorack Side Cheeks is very easy: Align the holes in the bracket with a mounting groove in the profile. The top edge of the side bracket has to match the top edge of the rail lip – if those two elements don’t align, flip the side bracket for 180° degrees.  Fix both elements together with self-tapping M5 bolts. To make sure that rails are properly spaced and prevent them from rotating during assembly – put any 3U module between the rails before tightening the bolts.

Important

• The listing price is per pair of 6U Eurorack Side Cheeks
• Screws and bolts are NOT INCLUDED
• Brackets are designed to work together with our eurorack rails with lips.

Construction Details

• Material: 3mm thick aluminum, silver color.
• Size: 266 x 30,5 x 3 mm
• Every side bracket has countersunk smaller holes for attaching the frame to the eurorack case with 3mm screws (screws not included)
• Every side bracket has countersunk larger holes for attaching the rails to the side panel with M5 bolts (bolts not included)

FAQ

• Do you have also plastic 6U side brackets?  No, 6U side brackets are too long to be made out of plastic and guarantee adequate stiffness. As an alternative, we recommend using 2x separate frames in size 3U.

Eurorack 6 Pin Drum Module Cable ribbon can be used to connect Erica Synths Drum Series modules to the Erica Synths Drum Sequencer.
This 6-pin cable can also be used for connecting inputs or outputs in Intellijel palette cases.

DETAILS
Configuration: 6pin (2x3pin)
Length: 50 cm

CUSTOMISATION 
Any custom length is available. Contact us for custom-length cables!

BULK ORDERS
Bulk orders discount. Contact us for a custom price offer.

4U Eurorack Rails Side Brackets_Pulp Logic Size. Those 4U panels are made from two sections. Standard size 3U section and 1U section sized for standard Pulp Logic size 1U modules. Eurorack side panels provide guidance for your rails to form a correctly sized 1U + 3U frame.  Therefore fixing the rails and modules inside your case will be very easy. By combining together a few frames you can create case any case size you need. Panels are designed to work with Doepfer style mounting rails with lips.
The construction of the brackets is laser-cut aluminum anodized to black color.

Why aluminium side panels?

• Aluminium side brackets are much stiffer than plastic ones. We recommend using aluminum side brackets for constructions where additional stiffness is a necessary factor – plastic cases, leather suitcases, etc.
• Aluminium side brackets can be used with rails of any length. We advise using aluminum side brackets especially with longer rails – over 126HP for extra rigidity.

Assembly

The assembly process of a 4U frame using these side brackets is very easy: Align the holes in the bracket with a mounting groove in the profile. The top edge of the side bracket has to match the top edge of the rail lip – if those two elements don’t align, flip the side bracket for 180° degrees.  Fix both elements together with self-tapping M5 bolts. To make sure that rails are properly spaced and prevent them from rotating during assembly – put any 1U and 3U modules between the rails before tightening the bolts.

Important

• The listing price is per pair of 4U side brackets
• Those panels are made for Pulp Logic sized 1U modules. Size for 1U Intellijel tiles is available here: 4U Pulp Logic Side Panels_aluminium
• Mounting screws and bolts are not included
• Brackets are designed to work together with our eurorack rails with lip

Details

• Length: 181mm
• Width: 30,5mm
• Thickness: 3mm
• Every panel has smaller inner holes for attaching it to your case with 3mm screws (screws not included)
• Every panel has larger holes to attach the rails to the side panel with M5 bolts (bolts not included)
• All holes are countersunk, allowing you to attach the frame to the case and without affecting the space of the modules

4U Eurorack Rails Side Brackets_Intellijel Size. Those 4U panels are made from two sections. Standard size 3U section and 1U section sized for standard Intellijel size 1U modules. Eurorack side panels provide guidance for your rails to form a correctly sized 1U + 3U frame.  Therefore fixing the rails and modules inside your case will be very easy. By combining together a few frames you can create case any case size you need. Panels are designed to work with Doepfer style mounting rails with lips.
The construction of the brackets is laser-cut aluminum anodized to black color.

Why aluminium side panels?

• Aluminium side brackets are much stiffer than plastic ones. We recommend using aluminum side brackets for constructions where additional stiffness is a necessary factor – plastic cases, leather suitcases, etc.
• Aluminium side brackets can be used with rails of any length. We advise using aluminum side brackets especially with longer rails – over 126HP for extra rigidity.

Assembly

The assembly process of a 4U frame using these side brackets is very easy: Align the holes in the bracket with a mounting groove in the profile. The top edge of the side bracket has to match the top edge of the rail lip – if those two elements don’t align, flip the side bracket for 180° degrees.  Fix both elements together with self-tapping M5 bolts. To make sure that rails are properly spaced and prevent them from rotating during assembly – put any 1U and 3U modules between the rails before tightening the bolts.

Important

• The listing price is per pair of 4U side brackets
• Those panels are made for Intellijel sized 1U modules. Size for 1U Pulp Logic tiles is available here: 4U Pulp Logic Side Panels_aluminium
• Mounting screws and bolts are not included
• Brackets are designed to work together with our eurorack rails with lip

Details

• Length: 177,4mm
• Width: 30,5mm
• Thickness: 3mm
• Every panel has smaller inner holes for attaching it to your case with 3mm screws (screws not included)
• Every panel has larger holes to attach the rails to the side panel with M5 bolts (bolts not included)
• All holes are countersunk, allowing you to attach the frame to the case and without affecting the space of the modules

Eurorack side panels provide guidance for your rails to form a correctly sized 3U frame.  Therefore fixing the rails and modules inside your case will be very easy. By combining together a few frames you can create case any case size you need. Therefore our side cheeks are perfect hardware for any of your DIY eurorack modular synthesizers. Panels are designed to work with Doepfer style mounting rails with lips.
The construction of the brackets is laser-cut aluminum anodized to black color.

Why aluminium side panels?

• Aluminium side brackets are much stiffer than plastic ones. We recommend using aluminum side brackets for constructions where additional stiffness is a necessary factor – plastic cases, leather suitcases, etc.
• Aluminium side brackets can be used with rails of any length. We advise using aluminum side brackets especially with longer rails – over 126HP for extra rigidity.

Assembly

The assembly process of a 3U frame using these side brackets is very easy: Align the holes in the bracket with a mounting groove in the profile. The top edge of the side bracket has to match the top edge of the rail lip – if those two elements don’t align, flip the side bracket for 180° degrees.  Fix both elements together with self-tapping M5 bolts. To make sure that rails are properly spaced and prevent them from rotating during assembly – put any 3U module between the rails before tightening the bolts.

Important

• The listing price is per pair of 3U side brackets
• Screws and bolts are not included
• Brackets are designed to work together with our eurorack rails with lips.

Construction Details

• Material: 3mm thick aluminum anodized to black color.
• Size: 133 x 30,5 x 3 mm
• Every side bracket has countersunk smaller holes for attaching the frame to the eurorack case with 3mm screws (screws not included)
• Every side bracket has countersunk larger holes for attaching the rails to the side panel with M5 bolts (bolts not included)
• Material: 3mm thick aluminum anodized to black color.

1U Eurorack Rails Side Brackets_Intellijel Size. Those 1U panels are made for 1U modules with front panel sized according to Intellijel standard size 1U modules. Eurorack side panels provide guidance for your rails to form a correctly sized 1U frame.  Therefore fixing the rails and modules inside your case will be very easy. By combining together a few frames you can create case any case size you need. Therefore our side cheeks are perfect hardware for any of your DIY eurorack modular synthesizers. Panels are designed to work with Doepfer style mounting rails with lips.
The construction of the brackets is laser-cut aluminum anodized to black color.

Why aluminium side panels?

• Aluminium side brackets are much stiffer than plastic ones. We recommend using aluminum side brackets for constructions where additional stiffness is a necessary factor – plastic cases, leather suitcases, etc.
• Aluminium side brackets can be used with rails of any length. We advise using aluminum side brackets especially with longer rails – over 126HP for extra rigidity.

Assembly

The assembly process of a 1U frame using these side brackets is very easy: Align the holes in the bracket with a mounting groove in the profile. The top edge of the side bracket has to match the top edge of the rail lip – if those two elements don’t align, flip the side bracket for 180° degrees.  Fix both elements together with self-tapping M5 bolts. To make sure that rails are properly spaced and prevent them from rotating during assembly – put any 1U module between the rails before tightening the bolts.

Important

• The listing price is per pair of 1U side brackets
• Those panels are made for Pulp Logic size 1U modules. Size for Intellijel 1U tiles is available here: 1U Intellijel Side Panels_aluminium
• Mounting screws and bolts are not included
• Brackets are designed to work together with our eurorack rails with lip

Details

• Length: 48mm
• Width: 30,5mm
• Thickness: 3mm
• Every panel has smaller inner holes for attaching it to your case with 3mm screws (screws not included)
• Every panel has larger holes to attach the rails to the side panel with M5 bolts (bolts not included)
• All holes are countersunk, allowing you to attach the frame to the case and without affecting the space of the modules

1U Eurorack Rails Side Brackets_Intellijel Size. Those 1U panels are made for 1U modules with front panel sized according to Intellijel standard size 1U modules. Eurorack side panels provide guidance for your rails to form a correctly sized 1U frame.  Therefore fixing the rails and modules inside your case will be very easy. By combining together a few frames you can create case any case size you need. Therefore our side cheeks are perfect hardware for any of your DIY eurorack modular synthesizers. Panels are designed to work with Doepfer style mounting rails with lips.
The construction of the brackets is laser-cut aluminum anodized to black color.

Why aluminium side panels?

• Aluminium side brackets are much stiffer than plastic ones. We recommend using aluminum side brackets for constructions where additional stiffness is a necessary factor – plastic cases, leather suitcases, etc.
• Aluminium side brackets can be used with rails of any length. We advise using aluminum side brackets especially with longer rails – over 126HP for extra rigidity.

Assembly

The assembly process of a 1U frame using these side brackets is very easy: Align the holes in the bracket with a mounting groove in the profile. The top edge of the side bracket has to match the top edge of the rail lip – if those two elements don’t align, flip the side bracket for 180° degrees.  Fix both elements together with self-tapping M5 bolts. To make sure that rails are properly spaced and prevent them from rotating during assembly – put any 1U module between the rails before tightening the bolts.

Important

• The listing price is per pair of 1U side brackets
• Those panels are made for Intellijel sized 1U modules. Size for 1U Pulp Logic tiles is available here: 1U Pulp Logic Side Panels_aluminium
• Mounting screws and bolts are not included
• Brackets are designed to work together with our eurorack rails with lip

Details

• Length: 44,4mm
• Width: 30,5mm
• Thickness: 3mm
• Every panel has smaller inner holes for attaching it to your case with 3mm screws (screws not included)
• Every panel has larger holes to attach the rails to the side panel with M5 bolts (bolts not included)
• All holes are countersunk, allowing you to attach the frame to the case and without affecting the space of the modules

We all know how popular the RT65b Meanwell PSU is in the world of DIY eurorack cases. Everyone who ever worked with this PSU knows that unfortunately, it has all the screw terminals exposed. Leaving the screw terminal connector uncovered creates several risks.  Firstly, it can lead to unintentional short circuits. Secondly, you are risking damaging the expensive modules if they come in contact with high voltage AC connectors. Thirdly, and most importantly, contact with high voltage AC can cause personal injury.
Therefore we decided to come with a solution to this problem! We have designed and manufactured a terminal cover that fits the RT65B Meanwell PSU perfectly!

RT65B Screws Terminal Cover Details

• • Our Mean Well RT65B Screws Terminal Cover is super small. It doesn’t take any additional space in your eurorack case. The entire screw terminal cover fits within the contour of the PSU housing. Most importantly, the cover is small enough that it doesn’t cover terminal descriptions. Therefore you will clearly see which wires conduct AC or DC voltages.
  • Installation is super easy. It doesn’t require any drilling or gluing. All you need to do is to remove one screw from the PSU, slide the screw terminal cover in place and secure it in place with the replacement screw that we supply.
  • We build our Mean Well RT65B Screws Terminal Cover from bright orange plastic. Therefore visually you won’t miss the fact that you put your fingers or modules close to the power supply.
  • The main purpose of the screw terminal cover is to not allow contact with the connectors. However, it doesn’t mean you can be careless with the installation! Remember that you work with high AC voltage! All connections must be made in accordance with the standards for proper insulation of electrical devices. If you are unfamiliar with the subject, hire a specialist to do it for you.

ATTENTION!

Assembly and connection of any parts leading mains voltage (e.g. mains inlet, power supply board, cables) are allowed only by qualified personnel who are familiar with the applicable safety regulations! For a layman, it is strictly forbidden to carry out such assemblies or connections!
All parts that lead mains voltage (wires, PCB tracks, electronic parts) have to be fully isolated against damage to the device before the unit is powered so that accidental contact with these parts is not possible! Otherwise, there is a danger to life!

DETAILS

• Packed in sets of 100, 500, or 1000 pieces
• Thread: 4mm
• Length: 10mm
• Type of head: Pan Head
• Type of cut: Phillips PH1
• Material: Steel

DETAILS

• Packed in sets of 100, 500, or 1000 pieces
• Thread: 3mm
• Length: 10mm
• Type of head: Pan Head
• Type of cut: Phillips PH1
• Material: Steel

DETAILS 
– Type of connector: AC supply
– Connector: socket
– Kind of connector: Male
– Current rating: 10A
– Standard: IEC 60320
– Mechanical mounting: For panel mounting with screw
– Electrical mounting: integrated 30cm wires
– Fuse size: 5x20mm
– Rated voltage: max. 250V AC
– 1x fuse
– on/off switch with light

Butterfly Surface Latch_Small_Penn Elcom L0914K

• Producent: Penn Elcom
• Model: L0914K
• Material: Steel
• Color: Black
• Qty:x8
• Height: 48mm / 1.89″
• Width: 49mm / 1.93″
• Depth: 18mm / 0.71″
• Weight: 90g/ 0.2lb/
• Diameter of fixing holes: 4.2mm / 0.16″

Butterfly Surface Latch_Small_Penn Elcom L0914K

• Producent: Penn Elcom
• Model: L0914K
• Material: Steel
• Color: Black
• Qty:x4
• Height: 48mm / 1.89″
• Width: 49mm / 1.93″
• Depth: 18mm / 0.71″
• Weight: 90g/ 0.2lb/
• Diameter of fixing holes: 4.2mm / 0.16″

Butterfly Surface Latch_Small_Penn Elcom L0914K

• Producent: Penn Elcom
• Model: L0914K
• Material: Steel
• Color: Black
• Qty:x2
• Height: 48mm / 1.89″
• Width: 49mm / 1.93″
• Depth: 18mm / 0.71″
• Weight: 90g/ 0.2lb/
• Diameter of fixing holes: 4.2mm / 0.16″

Butterfly Surface Latch_Small_Penn Elcom L0914K

• Producent: Penn Elcom
• Model: L0914K
• Material: Steel
• Color: Black
• Height: 48mm / 1.89″
• Width: 49mm / 1.93″
• Depth: 18mm / 0.71″
• Weight: 90g/ 0.2lb/
• Diameter of fixing holes: 4.2mm / 0.16″

Mono Patch Splitter is a “must-have” eurorack gadget. It solves the problem of lacking multiple patch points or not having enough space in the eurorack case to add another module.  This multiple doesn’t take any space in your rack!  Mono Patch Splitter works as a hub that takes a single signal input and splits it into 5 outputs. You can use it for signals like a CV, master clock, modulation sources, or even to connect patch cables together for long reach patching!

Details:

• Available colors: Black, White, Blue, Red, Pink, Green
• 1 input to 5 outputs
• Passive eurorack multiple
• Great for common signals like a CV master clock, and modulation sources
• Connect two cables together for long reaches