Screws & Bolts – ModularSynthLab

Eurorack Rails Screws M5x20mm, Countersunk Head, Imbus, Steel, Black Finish, 10pcs

admin — Fri, 20 Jan 2023 21:48:21 +0000

Those M5 x 32mm screws can be used to mount the eurorack rails directly to the sides of your case – without the necessity of using side panels. You will need a size 3mm imbus key to tighten those screws.

DETAILS

Packed in sets of 10 pieces
Thread: M5
Thread length: 20mm
Total screw length:
Type of head: Countersunk
Type of cut: Imbus
Cut size: HEX 3mm
Material: Steel
Plating material: Black finish
Head height:
Head diameter:
Strength class 10.9

Black Wood Screws 4x10mm, Pan Head, Phillips PH1, 100pcs, BLACK

admin — Sun, 19 Sep 2021 21:35:38 +0000

Those 4x10mm black wood screws can be used to mount hardware accessories to the wooden surfaces of your DIY eurorack case. We recommend using them to install our black hardware like Case Corners, Latches, Hinges, or Braces.
The regular Philips PH1 screwdriver is enough for tightening those screws.

DETAILS

Packed in sets of 100, 500, or 1000 pieces
Thread: 4mm
Length: 10mm
Type of head: Pan Head
Type of cut: Phillips PH1
Material: Steel

Black Wood Screws 3x10mm, Pan Head, Phillips PH1, 100pcs, BLACK

admin — Sun, 19 Sep 2021 20:40:26 +0000

Those 3x10mm black wood screws can be used to mount hardware accessories to the wooden surfaces of your DIY eurorack case. We recommend using them to install our black hardware like Case Corners, Latches, Hinges, or Braces.
The regular Philips PH1 screwdriver is enough for tightening those screws.

DETAILS

Packed in sets of 100, 500, or 1000 pieces
Thread: 3mm
Length: 10mm
Type of head: Pan Head
Type of cut: Phillips PH1
Material: Steel

Wood Screw 2.9 x 13mm, Pan head, Phillips PH1_20pcs

admin — Fri, 27 Dec 2019 09:29:21 +0000

Those 2 9 x 13mm wood screws can be used to mount accessories to wooden surfaces of your DIY case. It can be used to install our Filter Busboards. The regular Philips PH1 screwdriver is enough for tightening.

We recommend using those screws together with our Filter Bus Boards or Power Kits in combination with Busboard Standoffs

DETAILS

Packed in sets of 20 pieces
Thread: 2.9mm
Length: 13mm
Type of head: Pan Head
Type of cut: Phillips PH1
Material: Steel
Plating material: Zinc
Head height: 2.2mm
Head diameter: 5.6mm

Plastic Spacer, Bus Board Standoffs, PCB Distance, 20pcs

admin — Fri, 27 Dec 2019 06:54:03 +0000

Bus Board Standoffs become extremely handy when you need to lift Bus Board, or other PCB – few mm above the mounting surface. These spacers have a 7 mm outside diameter and drill hole 3.6 mm thus they work perfectly with 2.9 x 13 mm screws.

For example:

Mounting surface is more than 10mm thick?

Use our 2.9 x 13 mm screws. With standard 1.6 mm thick PCBs use 3 mm long Standoffs to get 8.4 mm long threads left that will go inside mounting surface.

Mounting surface is less than 10mm thick?

Use our 2.9 x 13 mm screws. With standard 1.6 mm thick PCBs use 5 mm long Standoffs to get 6.4 mm long threads left that will go inside mounting surface.

We recommend those Bus Board Standoffs when you are using our Filter Bus Boards or Power KITs.

DETAILS

Packed in sets of 20 pieces
Outside diameter: 7 mm
The internal diameter of 3.6 mm
Spacer length: 3 mm or 5 mm
Color: black
Material: polystyrene

Eurorack Anti Rack Rash Screws M3x6mm, Nylon Screews, Black, 50pcs

admin — Tue, 26 Nov 2019 08:35:44 +0000

Say goodbye to the rack rash problem. With those nylon screws, you will never need to be worried about scratching your eurorack module faceplate. Screws have M3 thread and are 6mm long. Works perfectly with all types of M3 threaded strips or sliding nuts. Packed in super handy aluminium tin can.

DETAILS

Packed inside laser engraved aluminium tin can
50pcs in set
Thread: M3
Thread length: 6mm
Total screw length: 8,5mm
Head height: 2.5mm
Head diameter: 6mm
Material: Nylon
Color: Black finish

Eurorack Rails Screws M5x30mm, With Flange, Button Head, Imbus, Steel, Black Finish, 10pcs

admin — Sat, 21 Sep 2019 07:44:47 +0000

Those M5 x 30mm screws can be used to mount the eurorack rails directly to sides of your case – without the necessity of using side panels. You will need a size 3mm imbus key to tighten those screws.

DETAILS

Packed in sets of 10 pieces
Thread: M5
Thread length: 30mm
Total screw length: 32,8mm
Type of head: Button
Version with flange
Type of cut: Imbus
Cut size: HEX 3mm
Material: Steel
Plating material: Black finish
Head height: 2.8mm
Head diameter: 11,6mm
Strength class 10.9
Thread pitch 0,8

IMPORTANT NOTE
With this listing, you buy only the M5 screws. Side panels and rails presented on photos are for presentation purpose only.

Eurorack Rails Screws M5x30mm, Cheese Head, Imbus, Steel, Zink Finish, 10pcs

admin — Sun, 08 Sep 2019 12:12:48 +0000

Those M5 x 30mm screws can be used to mount the eurorack rails directly to sides of your case – without the necessity of using side panels. You will need size HEX 4mm Imbus key to tighten those screws.

DETAILS

Packed in sets of 10 pieces
Thread: M5
Thread length: 30mm
Total screw length: 35mm
Type of head: Cheese head
Type of cut: Imbus
Cut size: HEX 4mm
Material: Steel
Plating material: Zinc
Head height: 5mm
Head diameter: 8,5mm
Strength class 8.8
Thread pitch 0,8

IMPORTANT NOTE
With this listing, you buy only the screws. Side panels and rails presented on photos are for presentation purpose only.

Eurorack Rails Screws M5x25mm, Cheese Head, Imbus, Steel, Zink Finish, 10pcs

admin — Sun, 08 Sep 2019 11:43:58 +0000

Those M5 x 25mm screws can be used to mount the eurorack rails directly to sides of your case – without the necessity of using side panels. You will need size HEX 4mm Imbus key to tighten those screws.

DETAILS

Packed in sets of 10 pieces
Thread: M5
Thread length: 25mm
Total screw length: 30mm
Type of head: Cheese head
Type of cut: Imbus
Cut size: HEX 4mm
Material: Steel
Plating material: Zinc
Head height: 5mm
Head diameter: 8,5mm
Strength class 8.8
Thread pitch 0,8

IMPORTANT NOTE
With this listing, you buy only the screws. Side panels and rails presented on photos are for presentation purpose only.

Eurorack Rails Screws M5x25mm, Cheese Head, Torx, Steel, Zink Finish, 10pcs

admin — Sun, 08 Sep 2019 10:00:15 +0000

Those M5 x 25mm screws can be used to mount the eurorack rails directly to sides of your case – without the necessity of using side panels. You will need size TX25 Torx key to tighten those screws.

DETAILS

Packed in sets of 10 pieces
Thread: M5
Thread length: 25mm
Total screw length: 28,5mm
Type of head: Cheese head
Type of cut: Torx
Cut size: TX25
Material: Steel
Plating material: Zinc
Head height: 3,5mm
Head diameter: 9,8mm
Strength class 4.8
Thread pitch 0,8

IMPORTANT NOTE
With this listing, you buy only the screws. Side panels and rails presented on photos are for presentation purpose only.

Eurorack Rails Screws M5x25mm, With Flange, Button Head, Imbus, Steel, Black Finish, 10pcs

admin — Sun, 08 Sep 2019 08:14:47 +0000

Those M5 x 25mm screws can be used to mount the eurorack rails directly to sides of your case – without the necessity of using side panels. You will need size 3mm imbus key to tighten those screws.

DETAILS

Packed in sets of 10 pieces
Thread: M5
Thread length: 25mm
Total screw length: 27,8mm
Type of head: Button
Version with flange
Type of cut: Imbus
Cut size: HEX 3mm
Material: Steel
Plating material: Black finish
Head height: 2.8mm
Head diameter: 11,6mm
Strength class 10.9
Thread pitch 0,8

IMPORTANT NOTE
With this listing you buy only the M5 screws. Side panels and rails presented on photos are for presentation purpose only.

Wood Screw,Spax, M3x12mm, Countersunk, 10pcs

admin — Thu, 10 Jan 2019 06:46:22 +0000

Those M3 x 12mm wood screws are needed to mount the side panels of your eurorack frame to the sides of your wooden eurorack case. Regular pozidriv PZ1 screwdriver is enough for tightening.

DETAILS

Packed in sets of 10 pieces
Thread: M3
Length: 12mm
Type of head: Countersunk
Type of cut: Pozidriv PZ1
Material: Steel
Plating material: Zinc
Head height: 1.8mm
Head diameter: 6mm

IMPORTANT NOTE
With this listing you buy only the screws. Side panels and rails presented on photos are for presentation purpose only.

Screws M5x12mm Countersunk, Hex Key, Allen Key_10pcs

admin — Tue, 08 Jan 2019 06:20:53 +0000

Those M5x12mm Countersunk Screws can be used to mount the side panels with the eurorack rails. Allen Key (hex key) 3mm is enough for tightening.
We recommend these screws for the self-tapping connection of eurorack side panels with rails. The hexagonal cut of the screw head that works with the 3mm Allen key makes self-tapping in aluminum profiles very easy.
The screw cuts the thread smoothly and effortlessly.

DETAILS

Packed in sets of 10 pieces
Thread: M5
Length: 12mm
Type of head: Countersunk
Type of cut: Imbus
Cut size: HEX 3mm
Material: Steel
Head height: 2.8mm
Head diameter: 10mm

Eurorack Threaded Strip Insert, M3, 3mm

admin — Mon, 07 Jan 2019 07:05:31 +0000

Eurorack Threaded Strip Insert, M3

A eurorack M3 threaded insert strips fit perfectly inside eurorack rails. Threaded strips are more expensive than sliding nuts, but they allow you to place modules perfectly aligned and you will never have to be afraid of running out of mounting holes as they fill the rail completely. The perfect solution for VIP eurorack cases.

DETAILS

We offer strips up to 196 HP. All strips are made out of a maximum of two pieces 84HP + extension piece, here is what you can expect to receive for all offered standard lengths:

84HP – single 84HP long threaded strip
104HP – two strips, 84HP + 20HP extension piece
114HP – two strips, 84HP + 30HP extension piece
126HP – two strips, 84HP + 42HP extension piece
168HP – two strips, 2x 84HP strips
196HP – single 196HP long strip

IMPORTANT NOTE

The listing price is PER STRIP SET for single rail

FAQ:

Why do you sell strips in two pieces?

At Modular Synth Lab we focus on delivering high-quality products at competitive prices. The decision to cut strips into standardized-sized pieces is a strategic effort to minimize manufacturing costs while maintaining the exact functionality you expect. This way we can optimize the use of raw materials and significantly reduce waste during production. This strategic approach translates directly to lower costs for you, our valued clients. By minimizing manufacturing costs through efficient material usage, we can pass on the savings to ensure that you continue to receive premium-quality products at prices that won’t break the bank.

Will those strips fit into the rails of Pittsburg Modular case?

Yes – it is a tight fit, the clearance in rails is small, but it works.

Eurorack Slide Nuts, Square,3mm

admin — Mon, 07 Jan 2019 06:23:19 +0000

Sliding nuts allow you to close gaps between modules, therefore you will not lose any HP of your case size.

DETAILS

packed in sets of 50/ 100/ 150/ 200 pieces
size: 5,5×1,8mm
fit to any rails with 6mm cut slot

FAQ
How many slide nuts should I use ?
We recommend to use one slide nut per every 4HP per rail:
84 HP = 21 slide nuts per rail
104 HP = 26 slide nuts per rail
114 HP = 29 slide nuts per rail
126 HP = 32 slide nuts per rail
168 HP = 42 slide nuts per rail
196 HP = 49 slide nuts per rail