Eurorack Bus Boards – ModularSynthLab

Filtered Bus Board for Eurorack power distribution_Konstant Lab

admin — Wed, 09 Nov 2022 22:25:03 +0000

Filtered BusBoard is a low-profile bus board with extra filtered output headers. This is an ideal bus board for all Konstant Lab power supplies but also works with other eurorack power supplies as well. The bus board contains 18 output headers. 12 direct headers with decoupling capacitors and 6 filtered headers with unique filtering circuits. Filtered headers are specially dedicated to feeding analog modules that are sensitive/susceptible to power quality. Decoupling capacitors and LC filters reject noise caused by PSU and digital modules by 70%. Two 4 ways DIP switches can tune filtration capacity when some PSU has starting problems with big capacity on output – especially handy if you have a lot of digital modules present in your system. Each power rail is protected against overvoltage for your modules and systems safety. 90% of the bus board area has only 11mm in height with inserted connectors. This feature makes the Filtered bus board an ideal power distribution solution for skiff cases where depth is a concern.

DOWNLOAD:

KONSTANT LAB_FILTER BUSBOARD

Eurorack Flying Bus Board Cable, 6x or 10x 16pin connectors

admin — Sat, 18 Apr 2020 17:20:07 +0000

Eurorack Flying Bus Board Cable

The MSL Flying Bus Board Cable is a passive power distribution cable that supplies power to the individual modules in the modular system.

Flying Bus Board Cables are available in two versions:
– 10x 16pin connectors / 50cm
– 6x 16pin connectors / 30cm

These cables have a single 16 pin female header to plug straight into a power supply. Plug your modules’ power cables into the 16 pin male headers.

The Flying Bus Cable can move around inside the case thus it gives you more flexibility when clearance is important. This is a budget-friendly choice for power distribution.

CUSTOM

Any custom length is available. Contact us for custom length bus cables!

BULK ORDERS

Bulk orders discount. Contact us for a custom price offer.

Wood Screw 2.9 x 13mm, Pan head, Phillips PH1_20pcs

admin — Fri, 27 Dec 2019 09:29:21 +0000

Those 2 9 x 13mm wood screws can be used to mount accessories to wooden surfaces of your DIY case. It can be used to install our Filter Busboards. The regular Philips PH1 screwdriver is enough for tightening.

We recommend using those screws together with our Filter Bus Boards or Power Kits in combination with Busboard Standoffs

DETAILS

Packed in sets of 20 pieces
Thread: 2.9mm
Length: 13mm
Type of head: Pan Head
Type of cut: Phillips PH1
Material: Steel
Plating material: Zinc
Head height: 2.2mm
Head diameter: 5.6mm

Plastic Spacer, Bus Board Standoffs, PCB Distance, 20pcs

admin — Fri, 27 Dec 2019 06:54:03 +0000

Bus Board Standoffs become extremely handy when you need to lift Bus Board, or other PCB – few mm above the mounting surface. These spacers have a 7 mm outside diameter and drill hole 3.6 mm thus they work perfectly with 2.9 x 13 mm screws.

For example:

Mounting surface is more than 10mm thick?

Use our 2.9 x 13 mm screws. With standard 1.6 mm thick PCBs use 3 mm long Standoffs to get 8.4 mm long threads left that will go inside mounting surface.

Mounting surface is less than 10mm thick?

Use our 2.9 x 13 mm screws. With standard 1.6 mm thick PCBs use 5 mm long Standoffs to get 6.4 mm long threads left that will go inside mounting surface.

We recommend those Bus Board Standoffs when you are using our Filter Bus Boards or Power KITs.

DETAILS

Packed in sets of 20 pieces
Outside diameter: 7 mm
The internal diameter of 3.6 mm
Spacer length: 3 mm or 5 mm
Color: black
Material: polystyrene

Intellijel TPS80W Triple Power Supply – 80W 3U / 6U busboard

admin — Fri, 18 Oct 2019 06:32:59 +0000

Serious power supply for serious eurorack case. Intellijel TPS80W shines with high stability, precision and very low noise emission. Its technical specifications are impressive as well. The TPS80W delivers up to 3 A at +12 and -12 V plus 1.5 A at +5 V. Up to 20 modules can be connected directly to board.
Protection circuits guard the modular system against short circuits, overvoltage and other nasty stuff. The output voltage accuracy is at +/-1 %.
In other words: If you need a beefy, reliable power supply, the TPS80W is the right choice!

To work properly it requires 90W power adapter. We recommend this adapter : GST90A15-P1M

DETAILS

• 80 Watt integrated switching power supply

• Low impedance star distribution due to 4 layer PCB

• +12V output at 3000 mA, -12V output at 3000 mA, +5V output at 1500 mA

• Triple 120° phased controller for low induced noise

• Output short circuit protection and foldback current limiting

• Output overvoltage protection from transient overshooting

• Soft start for controlled start up operation

• +/-1% output voltage accuracy

• Fits comfortably in an 84HP 3U case or 6U case and larger

• 34cm wide x 8cm tall and max height of 20mm.

• Mounting holes can be used with 0.157″ / 4mm PEM snaps for quick install.

Eurorack Bus Board, MSL Filter Bus Board

admin — Tue, 06 Aug 2019 10:48:50 +0000

The MSL Filter Busboard is used to distribute the operating voltages of a power supply unit to supply up to 20 modules in a Eurorack case.
Our high-quality filtered bus board is equipped with 20 safety keyed 16pin Eurorack connectors and noise filtering capacitors bank to reduce noise generated by PSU and AC power signal.

DETAILS:

Dimensions: 359mm x 30mm (14.13″ x 1,18″)
2x bypass capacitor bank to attenuate ripple & noise of mid, high and low frequencies
20x safety shrouded 16 pin eurorack power connectors
2x screw terminals (+12V, -12V, +5V, GND). Any of the terminals can be connected to PSU – the second terminal can be used to chain another busboard
4x grounded mounting holes at both ends of the Bus Board for easy case/rails grounding (holes are connected with the GND signal of the busboard)
Power supply cables, screw terminals located in the middle of the bus board to reduce circuit inductance and distribute voltage evenly through the whole board
3x LED indicators on every power rail
“Cut to length” option – cut anywhere between 16 pin connectors to customize bus board length

INSTALLATION MANUAL:

Download: MSL FILTER BUSBOARD MANUAL

IMPORTANT:

Mounting accessories are not included. They have to be purchased separately: