More colors and lengths are available here: MSL Adapter Cables

More colors and lengths are available here: MSL Adapter Cables

More colors and lengths are available here: MSL Adapter Cables

More colors and lengths are available here: MSL Adapter Cables

DETAILS

• Packed in sets of 10 pieces
• Thread: M5
• Thread length: 20mm
• Total screw length:
• Type of head: Countersunk
• Type of cut: Imbus
• Cut size: HEX 3mm
• Material: Steel
• Plating material: Black finish
• Head height:
• Head diameter:
• Strength class 10.9

196HP Eurorack Rail, Lightweight, Low Profile, Black (one piece) for building your DIY eurorack case. These rails are smaller and lighter than the standard rails, therefore, are a perfect choice for portable eurorack cases! The basis of those rails is the same as in standard profiles but the entire bottom part of the profile has been removed. These changes in design allowed for a reduction of the weight by over -40%! Therefore our Lightweight Eurorack Rails are perfect for all sorts of portable DIY eurorack cases where weight is a crucial factor. Rails are anodized to black mat color – characteristic for exclusive, high-end eurorack cases.  Rails are equipped with a lip – for that reason, they are well suited for holding eurorack modules in place in perfectly aligned horizontal lines.

EURORACK MODULES FIXING

Besides rails, you will most likely also search for modules fixing to hold the modules securely in place. We’ve got you covered! Especially for that purpose, we have for you M3 Sliding Nuts or M3 Threaded Strips – all you need to do is to choose what is your preference.
A suitable size of screws to fix the modules to the rail (assuming a module’s faceplate thickness of 2mm) is an M3 x 6mm or M3 x 8mm if a washer is used. To prevent scratches on the module’s front panels we recommend using Anti Rack Rash Screws.

INSTALLATION INSIDE EURORACK CASE

You can install rails inside your case in two ways:

• First – you can drill holes in your case and fix the rails to the case sides using M5 bolts – you can find a wide range of bolts to choose from in Eurorack Accessories.
• Second – this method is perfect for everyone who wants to be sure that eurorack rails are perfectly spaced and who prefers to avoid drilling holes in the case. Use our plastic or aluminum side brackets – we manufacture them in all possible sizes: 1U (Pulp Logic standard) | 1U (Intellijel standard) | 3U | 4U (Pulp Logic standard) | 4U (Intellijel standard) | 6U

EURORACK RAILS LENGHT

• 84 HP – 427mm / 16.81″
• 104 HP – 529mm / 20.82″
• 114 HP – 579mm / 22.79″
• 126 HP – 640mm / 25.19″
• 168 HP – 854mm / 33.62″
• 196 HP – 996mm / 39.21″

IMPORTANT NOTE

• Listing price is per single 196HP Lightweight Eurorack Rail

FAQ

“How many slide nuts should I use? “
We recommend to use at least one slide nut per every 4HP of eurorack rail:
84 HP = 21 slide nuts
104 HP = 26 slide nuts
114 HP = 29 slide nuts
126 HP = 32 slide nuts
168 HP = 42 slide nuts
196 HP = 49 slide nuts

168HP Eurorack Rail, Lightweight, Low Profile, Black (one piece) for building your DIY eurorack case. These rails are smaller and lighter than the standard rails, therefore, are a perfect choice for portable eurorack cases! The basis of those rails is the same as in standard profiles but the entire bottom part of the profile has been removed. These changes in design allowed for a reduction of the weight by over -40%! Therefore our Lightweight Eurorack Rails are perfect for all sorts of portable DIY eurorack cases where weight is a crucial factor. Rails are anodized to black mat color – characteristic for exclusive, high-end eurorack cases.  Rails are equipped with a lip – for that reason, they are well suited for holding eurorack modules in place in perfectly aligned horizontal lines.

EURORACK MODULES FIXING

Besides rails, you will most likely also search for modules fixing to hold the modules securely in place. We’ve got you covered! Especially for that purpose, we have for you M3 Sliding Nuts or M3 Threaded Strips – all you need to do is to choose what is your preference.
A suitable size of screws to fix the modules to the rail (assuming a module’s faceplate thickness of 2mm) is an M3 x 6mm or M3 x 8mm if a washer is used. To prevent scratches on the module’s front panels we recommend using Anti Rack Rash Screws.

INSTALLATION INSIDE EURORACK CASE

You can install rails inside your case in two ways:

• First – you can drill holes in your case and fix the rails to the case sides using M5 bolts – you can find a wide range of bolts to choose from in Eurorack Accessories.
• Second – this method is perfect for everyone who wants to be sure that eurorack rails are perfectly spaced and who prefers to avoid drilling holes in the case. Use our plastic or aluminum side brackets – we manufacture them in all possible sizes: 1U (Pulp Logic standard) | 1U (Intellijel standard) | 3U | 4U (Pulp Logic standard) | 4U (Intellijel standard) | 6U

EURORACK RAILS LENGHT

• 84 HP – 427mm / 16.81″
• 104 HP – 529mm / 20.82″
• 114 HP – 579mm / 22.79″
• 126 HP – 640mm / 25.19″
• 168 HP – 854mm / 33.62″
• 196 HP – 996mm / 39.21″

IMPORTANT NOTE

• Listing price is per single 168HP Lightweight Eurorack Rail

FAQ

“How many slide nuts should I use? “
We recommend to use at least one slide nut per every 4HP of eurorack rail:
84 HP = 21 slide nuts
104 HP = 26 slide nuts
114 HP = 29 slide nuts
126 HP = 32 slide nuts
168 HP = 42 slide nuts
196 HP = 49 slide nuts

114HP Eurorack Rail, Lightweight, Low Profile, Black (one piece) for building your DIY eurorack case. These rails are smaller and lighter than the standard rails, therefore, are a perfect choice for portable eurorack cases! The basis of those rails is the same as in standard profiles but the entire bottom part of the profile has been removed. These changes in design allowed for a reduction of the weight by over -40%! Therefore our Lightweight Eurorack Rails are perfect for all sorts of portable DIY eurorack cases where weight is a crucial factor. Rails are anodized to black mat color – characteristic for exclusive, high-end eurorack cases.  Rails are equipped with a lip – for that reason, they are well suited for holding eurorack modules in place in perfectly aligned horizontal lines.

EURORACK MODULES FIXING

Besides rails, you will most likely also search for modules fixing to hold the modules securely in place. We’ve got you covered! Especially for that purpose, we have for you M3 Sliding Nuts or M3 Threaded Strips – all you need to do is to choose what is your preference.
A suitable size of screws to fix the modules to the rail (assuming a module’s faceplate thickness of 2mm) is an M3 x 6mm or M3 x 8mm if a washer is used. To prevent scratches on the module’s front panels we recommend using Anti Rack Rash Screws.

INSTALLATION INSIDE EURORACK CASE

You can install rails inside your case in two ways:

• First – you can drill holes in your case and fix the rails to the case sides using M5 bolts – you can find a wide range of bolts to choose from in Eurorack Accessories.
• Second – this method is perfect for everyone who wants to be sure that eurorack rails are perfectly spaced and who prefers to avoid drilling holes in the case. Use our plastic or aluminum side brackets – we manufacture them in all possible sizes: 1U (Pulp Logic standard) | 1U (Intellijel standard) | 3U | 4U (Pulp Logic standard) | 4U (Intellijel standard) | 6U

EURORACK RAILS LENGHT

• 84 HP – 427mm / 16.81″
• 104 HP – 529mm / 20.82″
• 114 HP – 579mm / 22.79″
• 126 HP – 640mm / 25.19″
• 168 HP – 854mm / 33.62″
• 196 HP – 996mm / 39.21″

IMPORTANT NOTE

• Listing price is per single 114HP Lightweight Eurorack Rail

FAQ

“How many slide nuts should I use? “
We recommend to use at least one slide nut per every 4HP of eurorack rail:
84 HP = 21 slide nuts
104 HP = 26 slide nuts
114 HP = 29 slide nuts
126 HP = 32 slide nuts
168 HP = 42 slide nuts
196 HP = 49 slide nuts

3U Eurorack Side Brackets_Aluminium

Eurorack side panels provide guidance for your rails to form a correctly sized 3U frame.  Therefore fixing the rails and modules inside your case will be very easy. By combining together a few frames you can create a case of any case size you need. Therefore our side cheeks are perfect hardware for any of your DIY eurorack modular synthesizers. Panels are designed to work with Doepfer-style mounting rails with lips.
The construction of the brackets is laser-cut aluminum in silver color.

Why aluminium side panels?

• Aluminium side brackets are much stiffer than plastic ones. We recommend using aluminum side brackets for constructions where additional stiffness is a necessary factor – plastic cases, leather suitcases, etc.
• Aluminium side brackets can be used with rails of any length. We especially advise using aluminum side brackets, with longer rails – over 126HP – for extra rigidity.

Assembly

The assembly process of a 3U frame using these 3U Eurorack Side Brackets is very easy: Align the holes in the bracket with a mounting groove in the profile. The top edge of the side bracket has to match the top edge of the rail lip – if those two elements don’t align, flip the side bracket for 180° degrees.  Fix both elements together with self-tapping M5 bolts. To make sure that rails are properly spaced and prevent them from rotating during assembly – put any 3U module between the rails before tightening the bolts.

Important

• The listing price is per pair of 3U Eurorack Side Brackets
• Screws and bolts are NOT INCLUDED
• Brackets are designed to work together with our eurorack rails with lips.

Construction Details

• Material: 3mm thick aluminum, silver color.
• Size: 133 x 30,5 x 3 mm
• Every side bracket has countersunk smaller holes for attaching the frame to the eurorack case with 3mm screws (screws not included)
• Every side bracket has countersunk larger holes for attaching the rails to the side panel with M5 bolts (bolts not included)

6U Eurorack Side Brackets_Aluminium

Eurorack side panels provide guidance for your rails to form a correctly sized 6U frame.  Therefore fixing the rails and modules inside your case will be very easy. By combining together a few frames you can create a case of any case size you need. Therefore our side cheeks are perfect hardware for any of your DIY eurorack modular synthesizers. Panels are designed to work with Doepfer-style mounting rails with lips.
The construction of the brackets is laser-cut aluminum in silver color.

Why aluminium side panels?

• Aluminium side brackets are much stiffer than plastic ones. We recommend using aluminum side brackets for constructions where additional stiffness is a necessary factor – plastic cases, leather suitcases, etc.
• Aluminium side brackets can be used with rails of any length. We especially advise using aluminum side brackets, with longer rails – over 126HP – for extra rigidity.

Assembly

The assembly process of a 6U frame using these 6U Eurorack Side Cheeks is very easy: Align the holes in the bracket with a mounting groove in the profile. The top edge of the side bracket has to match the top edge of the rail lip – if those two elements don’t align, flip the side bracket for 180° degrees.  Fix both elements together with self-tapping M5 bolts. To make sure that rails are properly spaced and prevent them from rotating during assembly – put any 3U module between the rails before tightening the bolts.

Important

• The listing price is per pair of 6U Eurorack Side Cheeks
• Screws and bolts are NOT INCLUDED
• Brackets are designed to work together with our eurorack rails with lips.

Construction Details

• Material: 3mm thick aluminum, silver color.
• Size: 266 x 30,5 x 3 mm
• Every side bracket has countersunk smaller holes for attaching the frame to the eurorack case with 3mm screws (screws not included)
• Every side bracket has countersunk larger holes for attaching the rails to the side panel with M5 bolts (bolts not included)

FAQ

• Do you have also plastic 6U side brackets?  No, 6U side brackets are too long to be made out of plastic and guarantee adequate stiffness. As an alternative, we recommend using 2x separate frames in size 3U.

126HP Eurorack Rail, Lightweight, Low Profile, Black (one piece) for building your DIY eurorack case. These rails are smaller and lighter than the standard rails, therefore, are a perfect choice for portable eurorack cases! The basis of those rails is the same as in standard profiles but the entire bottom part of the profile has been removed. These changes in design allowed for a reduction of the weight by over -40%! Therefore our Lightweight Eurorack Rails are perfect for all sorts of portable DIY eurorack cases where weight is a crucial factor. Rails are anodized to black mat color – characteristic for exclusive, high-end eurorack cases.  Rails are equipped with a lip – for that reason, they are well suited for holding eurorack modules in place in perfectly aligned horizontal lines.

EURORACK MODULES FIXING

Besides rails, you will most likely also search for modules fixing to hold the modules securely in place. We’ve got you covered! Especially for that purpose, we have for you M3 Sliding Nuts or M3 Threaded Strips – all you need to do is to choose what is your preference.
A suitable size of screws to fix the modules to the rail (assuming a module’s faceplate thickness of 2mm) is an M3 x 6mm or M3 x 8mm if a washer is used. To prevent scratches on the module’s front panels we recommend using Anti Rack Rash Screws.

INSTALLATION INSIDE EURORACK CASE

You can install rails inside your case in two ways:

• First – you can drill holes in your case and fix the rails to the case sides using M5 bolts – you can find a wide range of bolts to choose from in Eurorack Accessories.
• Second – this method is perfect for everyone who wants to be sure that eurorack rails are perfectly spaced and who prefers to avoid drilling holes in the case. Use our plastic or aluminum side brackets – we manufacture them in all possible sizes: 1U (Pulp Logic standard) | 1U (Intellijel standard) | 3U | 4U (Pulp Logic standard) | 4U (Intellijel standard) | 6U

EURORACK RAILS LENGHT

• 84 HP – 427mm / 16.81″
• 104 HP – 529mm / 20.82″
• 114 HP – 579mm / 22.79″
• 126 HP – 640mm / 25.19″
• 168 HP – 854mm / 33.62″
• 196 HP – 996mm / 39.21″

IMPORTANT NOTE

• Listing price is per single 126HP Lightweight Eurorack Rail

FAQ

“How many slide nuts should I use? “
We recommend to use at least one slide nut per every 4HP of eurorack rail:
84 HP = 21 slide nuts
104 HP = 26 slide nuts
114 HP = 29 slide nuts
126 HP = 32 slide nuts
168 HP = 42 slide nuts
196 HP = 49 slide nuts

104HP Eurorack Rail, Lightweight, Low Profile, Black (one piece) for building your DIY eurorack case. These rails are smaller and lighter than the standard rails, therefore, are a perfect choice for portable eurorack cases! The basis of those rails is the same as in standard profiles but the entire bottom part of the profile has been removed. These changes in design allowed for a reduction of the weight by over -40%! Therefore our Lightweight Eurorack Rails are perfect for all sorts of portable DIY eurorack cases where weight is a crucial factor. Rails are anodized to black mat color – characteristic for exclusive, high-end eurorack cases.  Rails are equipped with a lip – for that reason, they are well suited for holding eurorack modules in place in perfectly aligned horizontal lines.

EURORACK MODULES FIXING

Besides rails, you will most likely also search for modules fixing to hold the modules securely in place. We’ve got you covered! Especially for that purpose, we have for you M3 Sliding Nuts or M3 Threaded Strips – all you need to do is to choose what is your preference.
A suitable size of screws to fix the modules to the rail (assuming a module’s faceplate thickness of 2mm) is an M3 x 6mm or M3 x 8mm if a washer is used. To prevent scratches on the module’s front panels we recommend using Anti Rack Rash Screws.

INSTALLATION INSIDE EURORACK CASE

You can install rails inside your case in two ways:

• First – you can drill holes in your case and fix the rails to the case sides using M5 bolts – you can find a wide range of bolts to choose from in Eurorack Accessories.
• Second – this method is perfect for everyone who wants to be sure that eurorack rails are perfectly spaced and who prefers to avoid drilling holes in the case. Use our plastic or aluminum side brackets – we manufacture them in all possible sizes: 1U (Pulp Logic standard) | 1U (Intellijel standard) | 3U | 4U (Pulp Logic standard) | 4U (Intellijel standard) | 6U

EURORACK RAILS LENGHT

• 84 HP – 427mm / 16.81″
• 104 HP – 529mm / 20.82″
• 114 HP – 579mm / 22.79″
• 126 HP – 640mm / 25.19″
• 168 HP – 854mm / 33.62″
• 196 HP – 996mm / 39.21″

IMPORTANT NOTE

• Listing price is per single 104HP Lightweight Eurorack Rail

FAQ

“How many slide nuts should I use? “
We recommend to use at least one slide nut per every 4HP of eurorack rail:
84 HP = 21 slide nuts
104 HP = 26 slide nuts
114 HP = 29 slide nuts
126 HP = 32 slide nuts
168 HP = 42 slide nuts
196 HP = 49 slide nuts

84HP Eurorack Rail, Lightweight, Low Profile, Black (one piece) for building your DIY eurorack case. These rails are smaller and lighter than the standard rails, therefore, are a perfect choice for portable eurorack cases! The basis of those rails is the same as in standard profiles but the entire bottom part of the profile has been removed. These changes in design allowed for a reduction of the weight by over -40%! Therefore our Lightweight Eurorack Rails are perfect for all sorts of portable DIY eurorack cases where weight is a crucial factor. Rails are anodized to black mat color – characteristic for exclusive, high-end eurorack cases.  Rails are equipped with a lip – for that reason, they are well suited for holding eurorack modules in place in perfectly aligned horizontal lines.

EURORACK MODULES FIXING

Besides rails, you will most likely also search for modules fixing to hold the modules securely in place. We’ve got you covered! Especially for that purpose, we have for you M3 Sliding Nuts or M3 Threaded Strips – all you need to do is to choose what is your preference.
A suitable size of screws to fix the modules to the rail (assuming a module’s faceplate thickness of 2mm) is an M3 x 6mm or M3 x 8mm if a washer is used. To prevent scratches on the module’s front panels we recommend using Anti Rack Rash Screws.

INSTALLATION INSIDE EURORACK CASE

You can install rails inside your case in two ways:

• First – you can drill holes in your case and fix the rails to the case sides using M5 bolts – you can find a wide range of bolts to choose from in Eurorack Accessories.
• Second – this method is perfect for everyone who wants to be sure that eurorack rails are perfectly spaced and who prefers to avoid drilling holes in the case. Use our plastic or aluminum side brackets – we manufacture them in all possible sizes: 1U (Pulp Logic standard) | 1U (Intellijel standard) | 3U | 4U (Pulp Logic standard) | 4U (Intellijel standard) | 6U

EURORACK RAILS LENGHT

• 84 HP – 427mm / 16.81″
• 104 HP – 529mm / 20.82″
• 114 HP – 579mm / 22.79″
• 126 HP – 640mm / 25.19″
• 168 HP – 854mm / 33.62″
• 196 HP – 996mm / 39.21″

IMPORTANT NOTE

• Listing price is per single 84HP Lightweight Eurorack Rail

FAQ

“How many slide nuts should I use? “
We recommend to use at least one slide nut per every 4HP of eurorack rail:
84 HP = 21 slide nuts
104 HP = 26 slide nuts
114 HP = 29 slide nuts
126 HP = 32 slide nuts
168 HP = 42 slide nuts
196 HP = 49 slide nuts

4U Eurorack Rails Side Brackets_Pulp Logic Size. Those 4U panels are made from two sections. Standard size 3U section and 1U section sized for standard Pulp Logic size 1U modules. Eurorack side panels provide guidance for your rails to form a correctly sized 1U + 3U frame.  Therefore fixing the rails and modules inside your case will be very easy. By combining together a few frames you can create case any case size you need. Panels are designed to work with Doepfer style mounting rails with lips.
The construction of the brackets is laser-cut aluminum anodized to black color.

Why aluminium side panels?

• Aluminium side brackets are much stiffer than plastic ones. We recommend using aluminum side brackets for constructions where additional stiffness is a necessary factor – plastic cases, leather suitcases, etc.
• Aluminium side brackets can be used with rails of any length. We advise using aluminum side brackets especially with longer rails – over 126HP for extra rigidity.

Assembly

The assembly process of a 4U frame using these side brackets is very easy: Align the holes in the bracket with a mounting groove in the profile. The top edge of the side bracket has to match the top edge of the rail lip – if those two elements don’t align, flip the side bracket for 180° degrees.  Fix both elements together with self-tapping M5 bolts. To make sure that rails are properly spaced and prevent them from rotating during assembly – put any 1U and 3U modules between the rails before tightening the bolts.

Important

• The listing price is per pair of 4U side brackets
• Those panels are made for Pulp Logic sized 1U modules. Size for 1U Intellijel tiles is available here: 4U Pulp Logic Side Panels_aluminium
• Mounting screws and bolts are not included
• Brackets are designed to work together with our eurorack rails with lip

Details

• Length: 181mm
• Width: 30,5mm
• Thickness: 3mm
• Every panel has smaller inner holes for attaching it to your case with 3mm screws (screws not included)
• Every panel has larger holes to attach the rails to the side panel with M5 bolts (bolts not included)
• All holes are countersunk, allowing you to attach the frame to the case and without affecting the space of the modules

4U Eurorack Rails Side Brackets_Intellijel Size. Those 4U panels are made from two sections. Standard size 3U section and 1U section sized for standard Intellijel size 1U modules. Eurorack side panels provide guidance for your rails to form a correctly sized 1U + 3U frame.  Therefore fixing the rails and modules inside your case will be very easy. By combining together a few frames you can create case any case size you need. Panels are designed to work with Doepfer style mounting rails with lips.
The construction of the brackets is laser-cut aluminum anodized to black color.

Why aluminium side panels?

• Aluminium side brackets are much stiffer than plastic ones. We recommend using aluminum side brackets for constructions where additional stiffness is a necessary factor – plastic cases, leather suitcases, etc.
• Aluminium side brackets can be used with rails of any length. We advise using aluminum side brackets especially with longer rails – over 126HP for extra rigidity.

Assembly

The assembly process of a 4U frame using these side brackets is very easy: Align the holes in the bracket with a mounting groove in the profile. The top edge of the side bracket has to match the top edge of the rail lip – if those two elements don’t align, flip the side bracket for 180° degrees.  Fix both elements together with self-tapping M5 bolts. To make sure that rails are properly spaced and prevent them from rotating during assembly – put any 1U and 3U modules between the rails before tightening the bolts.

Important

• The listing price is per pair of 4U side brackets
• Those panels are made for Intellijel sized 1U modules. Size for 1U Pulp Logic tiles is available here: 4U Pulp Logic Side Panels_aluminium
• Mounting screws and bolts are not included
• Brackets are designed to work together with our eurorack rails with lip

Details

• Length: 177,4mm
• Width: 30,5mm
• Thickness: 3mm
• Every panel has smaller inner holes for attaching it to your case with 3mm screws (screws not included)
• Every panel has larger holes to attach the rails to the side panel with M5 bolts (bolts not included)
• All holes are countersunk, allowing you to attach the frame to the case and without affecting the space of the modules

Eurorack side panels provide guidance for your rails to form a correctly sized 3U frame.  Therefore fixing the rails and modules inside your case will be very easy. By combining together a few frames you can create case any case size you need. Therefore our side cheeks are perfect hardware for any of your DIY eurorack modular synthesizers. Panels are designed to work with Doepfer style mounting rails with lips.
The construction of the brackets is laser-cut aluminum anodized to black color.

Why aluminium side panels?

• Aluminium side brackets are much stiffer than plastic ones. We recommend using aluminum side brackets for constructions where additional stiffness is a necessary factor – plastic cases, leather suitcases, etc.
• Aluminium side brackets can be used with rails of any length. We advise using aluminum side brackets especially with longer rails – over 126HP for extra rigidity.

Assembly

The assembly process of a 3U frame using these side brackets is very easy: Align the holes in the bracket with a mounting groove in the profile. The top edge of the side bracket has to match the top edge of the rail lip – if those two elements don’t align, flip the side bracket for 180° degrees.  Fix both elements together with self-tapping M5 bolts. To make sure that rails are properly spaced and prevent them from rotating during assembly – put any 3U module between the rails before tightening the bolts.

Important

• The listing price is per pair of 3U side brackets
• Screws and bolts are not included
• Brackets are designed to work together with our eurorack rails with lips.

Construction Details

• Material: 3mm thick aluminum anodized to black color.
• Size: 133 x 30,5 x 3 mm
• Every side bracket has countersunk smaller holes for attaching the frame to the eurorack case with 3mm screws (screws not included)
• Every side bracket has countersunk larger holes for attaching the rails to the side panel with M5 bolts (bolts not included)
• Material: 3mm thick aluminum anodized to black color.

1U Eurorack Rails Side Brackets_Intellijel Size. Those 1U panels are made for 1U modules with front panel sized according to Intellijel standard size 1U modules. Eurorack side panels provide guidance for your rails to form a correctly sized 1U frame.  Therefore fixing the rails and modules inside your case will be very easy. By combining together a few frames you can create case any case size you need. Therefore our side cheeks are perfect hardware for any of your DIY eurorack modular synthesizers. Panels are designed to work with Doepfer style mounting rails with lips.
The construction of the brackets is laser-cut aluminum anodized to black color.

Why aluminium side panels?

• Aluminium side brackets are much stiffer than plastic ones. We recommend using aluminum side brackets for constructions where additional stiffness is a necessary factor – plastic cases, leather suitcases, etc.
• Aluminium side brackets can be used with rails of any length. We advise using aluminum side brackets especially with longer rails – over 126HP for extra rigidity.

Assembly

The assembly process of a 1U frame using these side brackets is very easy: Align the holes in the bracket with a mounting groove in the profile. The top edge of the side bracket has to match the top edge of the rail lip – if those two elements don’t align, flip the side bracket for 180° degrees.  Fix both elements together with self-tapping M5 bolts. To make sure that rails are properly spaced and prevent them from rotating during assembly – put any 1U module between the rails before tightening the bolts.

Important

• The listing price is per pair of 1U side brackets
• Those panels are made for Pulp Logic size 1U modules. Size for Intellijel 1U tiles is available here: 1U Intellijel Side Panels_aluminium
• Mounting screws and bolts are not included
• Brackets are designed to work together with our eurorack rails with lip

Details

• Length: 48mm
• Width: 30,5mm
• Thickness: 3mm
• Every panel has smaller inner holes for attaching it to your case with 3mm screws (screws not included)
• Every panel has larger holes to attach the rails to the side panel with M5 bolts (bolts not included)
• All holes are countersunk, allowing you to attach the frame to the case and without affecting the space of the modules

1U Eurorack Rails Side Brackets_Intellijel Size. Those 1U panels are made for 1U modules with front panel sized according to Intellijel standard size 1U modules. Eurorack side panels provide guidance for your rails to form a correctly sized 1U frame.  Therefore fixing the rails and modules inside your case will be very easy. By combining together a few frames you can create case any case size you need. Therefore our side cheeks are perfect hardware for any of your DIY eurorack modular synthesizers. Panels are designed to work with Doepfer style mounting rails with lips.
The construction of the brackets is laser-cut aluminum anodized to black color.

Why aluminium side panels?

• Aluminium side brackets are much stiffer than plastic ones. We recommend using aluminum side brackets for constructions where additional stiffness is a necessary factor – plastic cases, leather suitcases, etc.
• Aluminium side brackets can be used with rails of any length. We advise using aluminum side brackets especially with longer rails – over 126HP for extra rigidity.

Assembly

The assembly process of a 1U frame using these side brackets is very easy: Align the holes in the bracket with a mounting groove in the profile. The top edge of the side bracket has to match the top edge of the rail lip – if those two elements don’t align, flip the side bracket for 180° degrees.  Fix both elements together with self-tapping M5 bolts. To make sure that rails are properly spaced and prevent them from rotating during assembly – put any 1U module between the rails before tightening the bolts.

Important

• The listing price is per pair of 1U side brackets
• Those panels are made for Intellijel sized 1U modules. Size for 1U Pulp Logic tiles is available here: 1U Pulp Logic Side Panels_aluminium
• Mounting screws and bolts are not included
• Brackets are designed to work together with our eurorack rails with lip

Details

• Length: 44,4mm
• Width: 30,5mm
• Thickness: 3mm
• Every panel has smaller inner holes for attaching it to your case with 3mm screws (screws not included)
• Every panel has larger holes to attach the rails to the side panel with M5 bolts (bolts not included)
• All holes are countersunk, allowing you to attach the frame to the case and without affecting the space of the modules

Modular Synth Lab high-quality Eurorack Patch Cables!  We are proud to present our own brand patch cables. MSL patch cables follow the very well-known sizing and color palette standards used by other popular brands. Thanks to that you can use our patch cables in combination with cables that you already own – without notifying visual differences.  A special feature of our cables is a small change in the rubber structure of the cords – we make our cables a little bit softer and flexible. Thanks to this, our patch cables do not tangle so easily and they quickly return to their natural, straight shape.

The 3,5mm (1/8″) mono jacks on both sides of the patch cables, have 8mm wide and 25mm high body – therefore they are adequate for dense patches and they also fit well into stackables.

At every stage of production, shipping, and storing, we keep our patch cables coiled and not twisted in any way. We do that to make sure that there is no risk that you could receive cable with any permanent kink.

Our patch cables are perfect to use with Eurorack, Modular and other equipment that uses 3,5mm (1/8″) patch cables like desktop synths and cv keyboards. These patch cables are also perfect to use with your semi-modular synths like the Moog Mother 32, Moog Grandmother, Moog DFAM, Behringer Neutron, Make Noise 0 Coast, Arturia Minibrute and Microbrute, Dreadbox Erebus, NYX, and many more.

Eurorack Patch Cables – Details

In this listing, you are purchasing a 5pack of patch cables with selected length and selected color.

• 12 Available colors: Black, Blue, Gray, Green, Orange, Peach, Pink, Red, Violet, White, Yellow, Glow In The Dark
• 6 Available lengths: 9cm (3.54″), 25cm (9.84″), 50cm (19.68″), 75cm (29.52″), 100cm (39.37″), 150cm (59.05″)

Check also our Eurorack Patch Cables Multicolor/Lenght MIX offer if you search for a flexible choice of colors and sizes in a package.

For beginners who search for their first patch cables set we have prepared a special offer of Eurorack Patch Cables Starter Pack “BEGINNER”_30pcs & Eurorack Patch Cables Starter Pack “PRO”_60pcs

Modular Synth Lab high-quality Eurorack Patch Cables!  We are proud to present our own brand patch cables. MSL patch cables follow the very well-known sizing and color palette standards used by other popular brands. Thanks to that you can use our patch cables in combination with cables that you already own – without notifying visual differences.  A special feature of our cables is a small change in the rubber structure of the cords – we make our cables a little bit softer and flexible. Thanks to this, our patch cables do not tangle so easily and they quickly return to their natural, straight shape.

The 3,5mm (1/8″) mono jacks on both sides of the patch cables, have 8mm wide and 25mm high body – therefore they are adequate for dense patches and they also fit well into stackables.

At every stage of production, shipping, and storing, we keep our patch cables coiled and not twisted in any way. We do that to make sure that there is no risk that you could receive cable with any permanent kink.

Our patch cables are perfect to use with Eurorack, Modular and other equipment that uses 3,5mm (1/8″) patch cables like desktop synths and cv keyboards. These patch cables are also perfect to use with your semi-modular synths like the Moog Mother 32, Moog Grandmother, Moog DFAM, Behringer Neutron, Make Noise 0 Coast, Arturia Minibrute and Microbrute, Dreadbox Erebus, NYX, and many more.

Eurorack Patch Cables – Details

In this listing, you are purchasing a 5pack of patch cables with selected length and selected color.

• 12 Available colors: Black, Blue, Gray, Green, Orange, Peach, Pink, Red, Violet, White, Yellow, Glow In The Dark
• 6 Available lengths: 9cm (3.54″), 25cm (9.84″), 50cm (19.68″), 75cm (29.52″), 100cm (39.37″), 150cm (59.05″)

Check also our Eurorack Patch Cables Multicolor/Lenght MIX offer if you search for a flexible choice of colors and sizes in a package.

For beginners who search for their first patch cables set we have prepared a special offer of Eurorack Patch Cables Starter Pack “BEGINNER”_30pcs & Eurorack Patch Cables Starter Pack “PRO”_60pcs