M3 – ModularSynthLab https://modularsynthlab.com DIY Eurorack Case Mon, 10 Jun 2024 08:49:20 +0000 en hourly 1 https://modularsynthlab.com/wp-content/uploads/2019/07/cropped-favicon3-32x32.png M3 – ModularSynthLab https://modularsynthlab.com 32 32 158313106 Black Wood Screws 4x10mm, Pan Head, Phillips PH1, 100pcs, BLACK https://modularsynthlab.com/product/black-wood-screws-4x10mm-pan-head-phillips-ph1-100pcs-black/ https://modularsynthlab.com/product/black-wood-screws-4x10mm-pan-head-phillips-ph1-100pcs-black/#comments Sun, 19 Sep 2021 21:35:38 +0000 https://modularsynthlab.com/?post_type=product&p=13308 Case Corners, Latches, Hinges, or Braces. The regular Philips PH1 screwdriver is enough for tightening those screws.]]> Those 4x10mm black wood screws can be used to mount hardware accessories to the wooden surfaces of your DIY eurorack case. We recommend using them to install our black hardware like Case Corners, Latches, Hinges, or Braces.
The regular Philips PH1 screwdriver is enough for tightening those screws.

DETAILS

  • Packed in sets of 100, 500, or 1000 pieces
  • Thread: 4mm
  • Length: 10mm
  • Type of head: Pan Head
  • Type of cut: Phillips PH1
  • Material: Steel
]]> https://modularsynthlab.com/product/black-wood-screws-4x10mm-pan-head-phillips-ph1-100pcs-black/feed/ 6 13308 Black Wood Screws 3x10mm, Pan Head, Phillips PH1, 100pcs, BLACK https://modularsynthlab.com/product/black-wood-screws-3x10mm-pan-head-phillips-ph1-100pcs-black/ https://modularsynthlab.com/product/black-wood-screws-3x10mm-pan-head-phillips-ph1-100pcs-black/#comments Sun, 19 Sep 2021 20:40:26 +0000 https://modularsynthlab.com/?post_type=product&p=13295 Case Corners, Latches, Hinges, or Braces. The regular Philips PH1 screwdriver is enough for tightening those screws.]]> Those 3x10mm black wood screws can be used to mount hardware accessories to the wooden surfaces of your DIY eurorack case. We recommend using them to install our black hardware like Case Corners, Latches, Hinges, or Braces.
The regular Philips PH1 screwdriver is enough for tightening those screws.

DETAILS

  • Packed in sets of 100, 500, or 1000 pieces
  • Thread: 3mm
  • Length: 10mm
  • Type of head: Pan Head
  • Type of cut: Phillips PH1
  • Material: Steel
]]> https://modularsynthlab.com/product/black-wood-screws-3x10mm-pan-head-phillips-ph1-100pcs-black/feed/ 4 13295 Wood Screw 2.9 x 13mm, Pan head, Phillips PH1_20pcs https://modularsynthlab.com/product/wood-screw-2-9-x-13mm-pan-head-phillips-ph1_20pcs/ https://modularsynthlab.com/product/wood-screw-2-9-x-13mm-pan-head-phillips-ph1_20pcs/#comments Fri, 27 Dec 2019 09:29:21 +0000 https://modularsynthlab.com/?post_type=product&p=5234 Those 2 9 x 13mm wood screws can be used to mount accessories to wooden surfaces of your DIY case. It can be used to install our Filter Busboards. The regular Philips PH1 screwdriver is enough for tightening.

We recommend using those screws together with our Filter Bus Boards or Power Kits in combination with Busboard Standoffs 

DETAILS

  • Packed in sets of 20 pieces
  • Thread: 2.9mm
  • Length: 13mm
  • Type of head: Pan Head
  • Type of cut: Phillips PH1
  • Material: Steel
  • Plating material: Zinc
  • Head height: 2.2mm
  • Head diameter: 5.6mm
]]> https://modularsynthlab.com/product/wood-screw-2-9-x-13mm-pan-head-phillips-ph1_20pcs/feed/ 66 5234 Wood Screw,Spax, M3x12mm, Countersunk, 10pcs https://modularsynthlab.com/product/wood-screwspax-m3x12mm-countersunk-10pcs/ https://modularsynthlab.com/product/wood-screwspax-m3x12mm-countersunk-10pcs/#comments Thu, 10 Jan 2019 06:46:22 +0000 https://modularsynthlab.com/?post_type=product&p=1596 Those M3 x 12mm wood screws are needed to mount the side panels of your eurorack frame to the sides of your wooden eurorack case. Regular pozidriv PZ1 screwdriver is enough for tightening.

DETAILS

  • Packed in sets of 10 pieces
  • Thread: M3
  • Length: 12mm
  • Type of head: Countersunk
  • Type of cut: Pozidriv PZ1
  • Material: Steel
  • Plating material: Zinc
  • Head height: 1.8mm
  • Head diameter: 6mm

IMPORTANT NOTE 
With this listing you buy only the screws. Side panels and rails presented on photos are for presentation purpose only.

]]> https://modularsynthlab.com/product/wood-screwspax-m3x12mm-countersunk-10pcs/feed/ 43 1596 Eurorack Threaded Strip Insert, M3, 3mm https://modularsynthlab.com/product/eurorack-rails-m3-threaded-inserts/ https://modularsynthlab.com/product/eurorack-rails-m3-threaded-inserts/#comments Mon, 07 Jan 2019 07:05:31 +0000 https://modularsynthlab.com/?post_type=product&p=1540 Check Details ->]]> Eurorack Threaded Strip Insert, M3

A eurorack M3 threaded insert strips fit perfectly inside eurorack rails. Threaded strips are more expensive than sliding nuts, but they allow you to place modules perfectly aligned and you will never have to be afraid of running out of mounting holes as they fill the rail completely. The perfect solution for VIP eurorack cases.

DETAILS

We offer strips up to 196 HP. All strips are made out of a maximum of two pieces 84HP + extension piece, here is what you can expect to receive for all offered standard lengths:

  • 84HP – single 84HP long threaded strip
  • 104HP – two strips, 84HP + 20HP extension piece
  • 114HP – two strips, 84HP + 30HP extension piece
  • 126HP – two strips, 84HP + 42HP extension piece
  • 168HP – two strips, 2x 84HP strips
  • 196HP – single 196HP long strip

IMPORTANT NOTE

  • The listing price is PER STRIP SET for single rail

FAQ:

Why do you sell strips in two pieces?
  • At Modular Synth Lab we focus on delivering high-quality products at competitive prices. The decision to cut strips into standardized-sized pieces is a strategic effort to minimize manufacturing costs while maintaining the exact functionality you expect. This way we can optimize the use of raw materials and significantly reduce waste during production. This strategic approach translates directly to lower costs for you, our valued clients. By minimizing manufacturing costs through efficient material usage, we can pass on the savings to ensure that you continue to receive premium-quality products at prices that won’t break the bank.
Will those strips fit into the rails of Pittsburg Modular case?
  • Yes – it is a tight fit, the clearance in rails is small, but it works.
]]> https://modularsynthlab.com/product/eurorack-rails-m3-threaded-inserts/feed/ 99 1540 Eurorack Slide Nuts, Square,3mm https://modularsynthlab.com/product/eurorack-slide-nuts-square3mm/ https://modularsynthlab.com/product/eurorack-slide-nuts-square3mm/#comments Mon, 07 Jan 2019 06:23:19 +0000 https://modularsynthlab.com/?post_type=product&p=1523 Sliding nuts allow you to close gaps between modules, therefore you will not lose any HP of your case size.

DETAILS

  • packed in sets of 50/ 100/ 150/ 200 pieces
  • size: 5,5×1,8mm
  • fit to any rails with 6mm cut slot

FAQ
How many slide nuts should I use ? 
We recommend to use one slide nut per every 4HP per rail:
84 HP = 21 slide nuts per rail
104 HP = 26 slide nuts per rail
114 HP = 29 slide nuts per rail
126 HP = 32 slide nuts per rail
168 HP = 42 slide nuts per rail
196 HP = 49 slide nuts per rail

]]> https://modularsynthlab.com/product/eurorack-slide-nuts-square3mm/feed/ 134 1523