Konstant Lab SeventyPWR is a high-performance, low-noise, and energy-efficient power supply that is ideal for powering cases with numerous digital modules. This power supply delivers power with precise, accurately adjusted output voltages, ensuring stable and reliable operation of all connected devices.
SeventyPWR has 70W of output power (+12V / 2500mA, -12V / 2500mA and +5V / 2000mA). The design is based on the more powerful HammerPWR PSU with few upgrades.
SeventyPWR PSU is targeted to all who want enough power, low noise, high efficiency, best filtering, and a high level of power stability and secure protection for all modules in the Eurorack case.
The narrow shape of SeventyPWR allows it to mount between two bus boards. A double output terminal connects wires separately to two (or four) bus boards. This minimalizes the wire length and impedance of the power network. SeventyPWR works perfectly with all standard bus boards.
A special feature of SeventyPWR is the possibility to adjust output voltage in a safe range. Output voltages +12V and -12V are factory adjusted with an accuracy of 0,1% or better. Adjusting features can compensate for voltage drops on wires under load. This feature allows setting very accurate voltage directly on the module’s power inputs.
As is our practice SeventyPWR comes with overvoltage, over temperature, over current, short current, overload, and input reverse polarity protection. There are two stages of input filters which decrease noise from power brick and the electrical grid.
SeventyPWR is safely + externally powered from a 90W power brick (Meanwell GSM90A19-P1M – sold separately ) to make sure you and your modules are safe as well under all conditions. The inlet panel with connector and switch comes with PSU as basic accessories.
SeventyPWR ideal choice for any system including skiff and DIY where depth and size can be your concern.
Easy to install the push-to-connect system – WAGO 256 series shockproof + push-to-connect terminals ensure easy installation of SeventyPWR within your case.
SeventyPWR wiring diagram – Diagram for an understanding of input and output wires connection. ( Busboards are sold separately )
Inlet Panel – dimensions and cutout diagram
- SeventyPWR delivers: 12V / 2500mA, -12V / 2500mA and +5V / 2000mA
- Size: 13 × 16 × 2 cm
- Weight: 300g
- Output power: 70W
- Input: 19V DC