Complete eurorack rails frameset to build a 1U section in the eurorack case. Simple assembly thanks to self-tapping screws, perfectly sized countersunk holes, and specially designed side brackets.
IMPORTANT NOTE
- 1U section of this eurorack frame is made especially for Intellijel size 1U modules. Frame for standard 1U module sizes is available here: 1U Standard Size Frame
DETAILS
- 2 x eurorack rail with lip
- 2 x black plastic side brackets to form a correctly sized frame and connect rails together
- 4 x M5 bolts to fasten the rails to the side plates
- 2 x woodscrew 3mm to fasten the rail set to your case
- 2 x threaded inserts or set of sliding nuts
FRAME LENGTH
- 84 HP – 433mm
- 104 HP – 535mm
- 114 HP – 585mm
- 126 HP – 646mm
- 168 HP – 860mm
- 196 HP – 1002mm
FAQ
How many slide nuts will I get with rail set?
We recommend to use one slide nut per every 4HP per rail:
84 HP = 42 slide nuts
104 HP = 52 slide nuts
114 HP = 57 slide nuts
126 HP = 63 slide nuts
168 HP = 84 slide nuts
196 HP = 98 slide nuts
Anonymous (verified owner) –
Christiaan Muller (verified owner) –
Timothy Gregory (verified owner) –
nice solid 1U kit. Couple of suggestions – make it clear in the product description that the endplates are printed plastic, not alu like some of the 3U/6U endplates. Also would be good to have the exact dimensions listed. I worked from the Intelligel spec but I was nervous because my case build is so tight.
Louis Ledoux (verified owner) –
Frederic R. (verified owner) –
The 3D-printed brackets are a little too thick compared to the metal ones I’m used to, thus it was difficult to install the rails in my Doepfer case ; fortunately I managed to get it done, although it took me a while and I had to rely on brute force. Now it certainly won’t budge anymore ^^ If these brackets could be 0.5mm or even 1mm thinner (I don’t know if that is possible though), it would be way much easier to fit !
Other than that, overall quality is great, rails are solid and beautiful 🙂
Victor Michée (verified owner) –