Konstant Lab BoardPWR – small “0 HP” power supply

138.84 (excl. VAT)

Konstant Lab BoardPWR is a small and low weight synth PSU solution. You can mount it into your synth case without sacrificing any additional HP. BoardPWR is a perfect solution for portable cases where weight is an important factor, and for small studio cases where you don’t want to lose any HP of the modules space.

 

Konstant Lab BoardPWR is a small and low weight synth PSU solution. You can mount it into your synth case without sacrificing any HP. If you are looking for a high-quality low noise power supply for your modular synth, you found it. A small footprint makes it a perfect PSU solution for the ever traveling musician. It will also work great in smaller studio cases where you don’t want to lose any HP of the modules space.

Power Supply 

BoardPWR is safely supplied from an external DC power brick (16-20V). It is possible to chain more boards together in one case and feed them from one power brick altogether.
We recommend Meanwell GSM60A18-P1J DC Power Brick for one BoardPWR PSU and GST120A20-P1M for two BoardPWR PSU solutions.

Connectors

There are two types of output connections. You can either connect bus boards via two 16pins IDC headers (ideal for flying bus boards) or via high-quality WAGO spring terminals.

Details

  • BoardPWR delivers: 12V / 2A, -12V / 1.2A and +5V/1.5A
  • Size: 10 × 4.5 × 2 cm
  • Weight: 127 g
  • Output power: 45W
  • Input: 18V (16-20V)
DIMENSIONS

10 × 4.5 × 2 cm, 127 g

OUTPUT POWER

45w

OUTPUTS

+12V / 2A, -12V / 1.2A, +5V / 1.5A

INPUT

18V (16-20V)

OUTPUT CONNECTORS

2x 16 pin IDC for flat cable, 4x WAGO spring terminals

INPUT CONNECTORS

WAGO spring terminals, Panel with 5,5 x 2.1 DC input (center positive) and switch included

PROTECTIONS

Input filter, Input overvoltage, Input reverse polarity voltage protection, Output overvoltage, Output short circuit – automatic recovery, Output over current – automatic recovery, All output protections are independent for each rail

EFFICIENCY

92%

OTHER

Input common mode LC filter with high efficiency of canceling noise and interference from input connector, Additional input filter on each regulator for minimal output noise and interferences, LEDs indicate present and drop of output voltage

ACCESSORIES

Alluminum panel with 5,5 x 2.1 DC input (center positive), power switch and two 25cm wires, Screws 2,9 x 13mm 4pcs, Spacers 3mm height 4pcs

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Content missing