196HP Eurorack Rail, Lightweight, Low Profile, Black (one piece) for building your DIY eurorack case. These rails are smaller and lighter than the standard rails, therefore, are a perfect choice for portable eurorack cases! The basis of those rails is the same as in standard profiles but the entire bottom part of the profile has been removed. These changes in design allowed for a reduction of the weight by over -40%! Therefore our Lightweight Eurorack Rails are perfect for all sorts of portable DIY eurorack cases where weight is a crucial factor. Rails are anodized to black mat color – characteristic for exclusive, high-end eurorack cases.  Rails are equipped with a lip – for that reason, they are well suited for holding eurorack modules in place in perfectly aligned horizontal lines.

EURORACK MODULES FIXING

Besides rails, you will most likely also search for modules fixing to hold the modules securely in place. We’ve got you covered! Especially for that purpose, we have for you M3 Sliding Nuts or M3 Threaded Strips – all you need to do is to choose what is your preference.
A suitable size of screws to fix the modules to the rail (assuming a module’s faceplate thickness of 2mm) is an M3 x 6mm or M3 x 8mm if a washer is used. To prevent scratches on the module’s front panels we recommend using Anti Rack Rash Screws.

INSTALLATION INSIDE EURORACK CASE

You can install rails inside your case in two ways:

• First – you can drill holes in your case and fix the rails to the case sides using M5 bolts – you can find a wide range of bolts to choose from in Eurorack Accessories.
• Second – this method is perfect for everyone who wants to be sure that eurorack rails are perfectly spaced and who prefers to avoid drilling holes in the case. Use our plastic or aluminum side brackets – we manufacture them in all possible sizes: 1U (Pulp Logic standard) | 1U (Intellijel standard) | 3U | 4U (Pulp Logic standard) | 4U (Intellijel standard) | 6U

EURORACK RAILS LENGHT

• 84 HP – 427mm / 16.81″
• 104 HP – 529mm / 20.82″
• 114 HP – 579mm / 22.79″
• 126 HP – 640mm / 25.19″
• 168 HP – 854mm / 33.62″
• 196 HP – 996mm / 39.21″

IMPORTANT NOTE

• Listing price is per single 196HP Lightweight Eurorack Rail

FAQ

“How many slide nuts should I use? “
We recommend to use at least one slide nut per every 4HP of eurorack rail:
84 HP = 21 slide nuts
104 HP = 26 slide nuts
114 HP = 29 slide nuts
126 HP = 32 slide nuts
168 HP = 42 slide nuts
196 HP = 49 slide nuts

168HP Eurorack Rail, Lightweight, Low Profile, Black (one piece) for building your DIY eurorack case. These rails are smaller and lighter than the standard rails, therefore, are a perfect choice for portable eurorack cases! The basis of those rails is the same as in standard profiles but the entire bottom part of the profile has been removed. These changes in design allowed for a reduction of the weight by over -40%! Therefore our Lightweight Eurorack Rails are perfect for all sorts of portable DIY eurorack cases where weight is a crucial factor. Rails are anodized to black mat color – characteristic for exclusive, high-end eurorack cases.  Rails are equipped with a lip – for that reason, they are well suited for holding eurorack modules in place in perfectly aligned horizontal lines.

EURORACK MODULES FIXING

Besides rails, you will most likely also search for modules fixing to hold the modules securely in place. We’ve got you covered! Especially for that purpose, we have for you M3 Sliding Nuts or M3 Threaded Strips – all you need to do is to choose what is your preference.
A suitable size of screws to fix the modules to the rail (assuming a module’s faceplate thickness of 2mm) is an M3 x 6mm or M3 x 8mm if a washer is used. To prevent scratches on the module’s front panels we recommend using Anti Rack Rash Screws.

INSTALLATION INSIDE EURORACK CASE

You can install rails inside your case in two ways:

• First – you can drill holes in your case and fix the rails to the case sides using M5 bolts – you can find a wide range of bolts to choose from in Eurorack Accessories.
• Second – this method is perfect for everyone who wants to be sure that eurorack rails are perfectly spaced and who prefers to avoid drilling holes in the case. Use our plastic or aluminum side brackets – we manufacture them in all possible sizes: 1U (Pulp Logic standard) | 1U (Intellijel standard) | 3U | 4U (Pulp Logic standard) | 4U (Intellijel standard) | 6U

EURORACK RAILS LENGHT

• 84 HP – 427mm / 16.81″
• 104 HP – 529mm / 20.82″
• 114 HP – 579mm / 22.79″
• 126 HP – 640mm / 25.19″
• 168 HP – 854mm / 33.62″
• 196 HP – 996mm / 39.21″

IMPORTANT NOTE

• Listing price is per single 168HP Lightweight Eurorack Rail

FAQ

“How many slide nuts should I use? “
We recommend to use at least one slide nut per every 4HP of eurorack rail:
84 HP = 21 slide nuts
104 HP = 26 slide nuts
114 HP = 29 slide nuts
126 HP = 32 slide nuts
168 HP = 42 slide nuts
196 HP = 49 slide nuts

114HP Eurorack Rail, Lightweight, Low Profile, Black (one piece) for building your DIY eurorack case. These rails are smaller and lighter than the standard rails, therefore, are a perfect choice for portable eurorack cases! The basis of those rails is the same as in standard profiles but the entire bottom part of the profile has been removed. These changes in design allowed for a reduction of the weight by over -40%! Therefore our Lightweight Eurorack Rails are perfect for all sorts of portable DIY eurorack cases where weight is a crucial factor. Rails are anodized to black mat color – characteristic for exclusive, high-end eurorack cases.  Rails are equipped with a lip – for that reason, they are well suited for holding eurorack modules in place in perfectly aligned horizontal lines.

EURORACK MODULES FIXING

Besides rails, you will most likely also search for modules fixing to hold the modules securely in place. We’ve got you covered! Especially for that purpose, we have for you M3 Sliding Nuts or M3 Threaded Strips – all you need to do is to choose what is your preference.
A suitable size of screws to fix the modules to the rail (assuming a module’s faceplate thickness of 2mm) is an M3 x 6mm or M3 x 8mm if a washer is used. To prevent scratches on the module’s front panels we recommend using Anti Rack Rash Screws.

INSTALLATION INSIDE EURORACK CASE

You can install rails inside your case in two ways:

• First – you can drill holes in your case and fix the rails to the case sides using M5 bolts – you can find a wide range of bolts to choose from in Eurorack Accessories.
• Second – this method is perfect for everyone who wants to be sure that eurorack rails are perfectly spaced and who prefers to avoid drilling holes in the case. Use our plastic or aluminum side brackets – we manufacture them in all possible sizes: 1U (Pulp Logic standard) | 1U (Intellijel standard) | 3U | 4U (Pulp Logic standard) | 4U (Intellijel standard) | 6U

EURORACK RAILS LENGHT

• 84 HP – 427mm / 16.81″
• 104 HP – 529mm / 20.82″
• 114 HP – 579mm / 22.79″
• 126 HP – 640mm / 25.19″
• 168 HP – 854mm / 33.62″
• 196 HP – 996mm / 39.21″

IMPORTANT NOTE

• Listing price is per single 114HP Lightweight Eurorack Rail

FAQ

“How many slide nuts should I use? “
We recommend to use at least one slide nut per every 4HP of eurorack rail:
84 HP = 21 slide nuts
104 HP = 26 slide nuts
114 HP = 29 slide nuts
126 HP = 32 slide nuts
168 HP = 42 slide nuts
196 HP = 49 slide nuts

126HP Eurorack Rail, Lightweight, Low Profile, Black (one piece) for building your DIY eurorack case. These rails are smaller and lighter than the standard rails, therefore, are a perfect choice for portable eurorack cases! The basis of those rails is the same as in standard profiles but the entire bottom part of the profile has been removed. These changes in design allowed for a reduction of the weight by over -40%! Therefore our Lightweight Eurorack Rails are perfect for all sorts of portable DIY eurorack cases where weight is a crucial factor. Rails are anodized to black mat color – characteristic for exclusive, high-end eurorack cases.  Rails are equipped with a lip – for that reason, they are well suited for holding eurorack modules in place in perfectly aligned horizontal lines.

EURORACK MODULES FIXING

Besides rails, you will most likely also search for modules fixing to hold the modules securely in place. We’ve got you covered! Especially for that purpose, we have for you M3 Sliding Nuts or M3 Threaded Strips – all you need to do is to choose what is your preference.
A suitable size of screws to fix the modules to the rail (assuming a module’s faceplate thickness of 2mm) is an M3 x 6mm or M3 x 8mm if a washer is used. To prevent scratches on the module’s front panels we recommend using Anti Rack Rash Screws.

INSTALLATION INSIDE EURORACK CASE

You can install rails inside your case in two ways:

• First – you can drill holes in your case and fix the rails to the case sides using M5 bolts – you can find a wide range of bolts to choose from in Eurorack Accessories.
• Second – this method is perfect for everyone who wants to be sure that eurorack rails are perfectly spaced and who prefers to avoid drilling holes in the case. Use our plastic or aluminum side brackets – we manufacture them in all possible sizes: 1U (Pulp Logic standard) | 1U (Intellijel standard) | 3U | 4U (Pulp Logic standard) | 4U (Intellijel standard) | 6U

EURORACK RAILS LENGHT

• 84 HP – 427mm / 16.81″
• 104 HP – 529mm / 20.82″
• 114 HP – 579mm / 22.79″
• 126 HP – 640mm / 25.19″
• 168 HP – 854mm / 33.62″
• 196 HP – 996mm / 39.21″

IMPORTANT NOTE

• Listing price is per single 126HP Lightweight Eurorack Rail

FAQ

“How many slide nuts should I use? “
We recommend to use at least one slide nut per every 4HP of eurorack rail:
84 HP = 21 slide nuts
104 HP = 26 slide nuts
114 HP = 29 slide nuts
126 HP = 32 slide nuts
168 HP = 42 slide nuts
196 HP = 49 slide nuts

104HP Eurorack Rail, Lightweight, Low Profile, Black (one piece) for building your DIY eurorack case. These rails are smaller and lighter than the standard rails, therefore, are a perfect choice for portable eurorack cases! The basis of those rails is the same as in standard profiles but the entire bottom part of the profile has been removed. These changes in design allowed for a reduction of the weight by over -40%! Therefore our Lightweight Eurorack Rails are perfect for all sorts of portable DIY eurorack cases where weight is a crucial factor. Rails are anodized to black mat color – characteristic for exclusive, high-end eurorack cases.  Rails are equipped with a lip – for that reason, they are well suited for holding eurorack modules in place in perfectly aligned horizontal lines.

EURORACK MODULES FIXING

Besides rails, you will most likely also search for modules fixing to hold the modules securely in place. We’ve got you covered! Especially for that purpose, we have for you M3 Sliding Nuts or M3 Threaded Strips – all you need to do is to choose what is your preference.
A suitable size of screws to fix the modules to the rail (assuming a module’s faceplate thickness of 2mm) is an M3 x 6mm or M3 x 8mm if a washer is used. To prevent scratches on the module’s front panels we recommend using Anti Rack Rash Screws.

INSTALLATION INSIDE EURORACK CASE

You can install rails inside your case in two ways:

• First – you can drill holes in your case and fix the rails to the case sides using M5 bolts – you can find a wide range of bolts to choose from in Eurorack Accessories.
• Second – this method is perfect for everyone who wants to be sure that eurorack rails are perfectly spaced and who prefers to avoid drilling holes in the case. Use our plastic or aluminum side brackets – we manufacture them in all possible sizes: 1U (Pulp Logic standard) | 1U (Intellijel standard) | 3U | 4U (Pulp Logic standard) | 4U (Intellijel standard) | 6U

EURORACK RAILS LENGHT

• 84 HP – 427mm / 16.81″
• 104 HP – 529mm / 20.82″
• 114 HP – 579mm / 22.79″
• 126 HP – 640mm / 25.19″
• 168 HP – 854mm / 33.62″
• 196 HP – 996mm / 39.21″

IMPORTANT NOTE

• Listing price is per single 104HP Lightweight Eurorack Rail

FAQ

“How many slide nuts should I use? “
We recommend to use at least one slide nut per every 4HP of eurorack rail:
84 HP = 21 slide nuts
104 HP = 26 slide nuts
114 HP = 29 slide nuts
126 HP = 32 slide nuts
168 HP = 42 slide nuts
196 HP = 49 slide nuts

84HP Eurorack Rail, Lightweight, Low Profile, Black (one piece) for building your DIY eurorack case. These rails are smaller and lighter than the standard rails, therefore, are a perfect choice for portable eurorack cases! The basis of those rails is the same as in standard profiles but the entire bottom part of the profile has been removed. These changes in design allowed for a reduction of the weight by over -40%! Therefore our Lightweight Eurorack Rails are perfect for all sorts of portable DIY eurorack cases where weight is a crucial factor. Rails are anodized to black mat color – characteristic for exclusive, high-end eurorack cases.  Rails are equipped with a lip – for that reason, they are well suited for holding eurorack modules in place in perfectly aligned horizontal lines.

EURORACK MODULES FIXING

Besides rails, you will most likely also search for modules fixing to hold the modules securely in place. We’ve got you covered! Especially for that purpose, we have for you M3 Sliding Nuts or M3 Threaded Strips – all you need to do is to choose what is your preference.
A suitable size of screws to fix the modules to the rail (assuming a module’s faceplate thickness of 2mm) is an M3 x 6mm or M3 x 8mm if a washer is used. To prevent scratches on the module’s front panels we recommend using Anti Rack Rash Screws.

INSTALLATION INSIDE EURORACK CASE

You can install rails inside your case in two ways:

• First – you can drill holes in your case and fix the rails to the case sides using M5 bolts – you can find a wide range of bolts to choose from in Eurorack Accessories.
• Second – this method is perfect for everyone who wants to be sure that eurorack rails are perfectly spaced and who prefers to avoid drilling holes in the case. Use our plastic or aluminum side brackets – we manufacture them in all possible sizes: 1U (Pulp Logic standard) | 1U (Intellijel standard) | 3U | 4U (Pulp Logic standard) | 4U (Intellijel standard) | 6U

EURORACK RAILS LENGHT

• 84 HP – 427mm / 16.81″
• 104 HP – 529mm / 20.82″
• 114 HP – 579mm / 22.79″
• 126 HP – 640mm / 25.19″
• 168 HP – 854mm / 33.62″
• 196 HP – 996mm / 39.21″

IMPORTANT NOTE

• Listing price is per single 84HP Lightweight Eurorack Rail

FAQ

“How many slide nuts should I use? “
We recommend to use at least one slide nut per every 4HP of eurorack rail:
84 HP = 21 slide nuts
104 HP = 26 slide nuts
114 HP = 29 slide nuts
126 HP = 32 slide nuts
168 HP = 42 slide nuts
196 HP = 49 slide nuts

EURORACK MODULES FIXING

Besides rails, you will most likely also search for modules fixing to hold the modules securely in place. We’ve got you covered! Especially for that purpose, we have for you M3 Sliding Nuts or M3 Threaded Strips – all you need to do is to choose what is your preference.
A suitable size of screws to fix the modules to the rail (assuming a modules face plate thickness of 2mm) is an M3 x 6mm or M3 x 8mm if a washer is used. To prevent scratches on the modules front panels we recommend using Anti Rack Rash Screws.

INSTALLATION INSIDE EURORACK CASE

You can install rails inside your case in two ways:

• First – you can drill holes in your case and fix the rails to the case sides using M5 bolts – you can find a wide range of bolts to choose from in Eurorack Accessories.
• Second – this method is perfect for everyone who wants to be sure that eurorack rails are perfectly spaced and who prefer to avoid drilling holes in your case. Use our 3D printed side brackets – we manufacture them in all possible sizes: 1U (Pulp Logic standard) | 1U (Intellijel standard) | 3U | 4U (Pulp Logic standard) | 4U (Intellijel standard) | 6U

EURORACK RAILS LENGHT

• 84 HP – 427mm / 16.81″
• 104 HP – 529mm / 20.82″
• 114 HP – 579mm / 22.79″
• 126 HP – 640mm / 25.19″
• 168 HP – 854mm / 33.62″
• 196 HP – 996mm / 39.21″

IMPORTANT NOTE

• Listing price is per single 84HP Lightweight Eurorack Rail

FAQ

“How many slide nuts should I use? “
We recommend to use at least one slide nut per every 4HP of eurorack rail:
84 HP = 21 slide nuts
104 HP = 26 slide nuts
114 HP = 29 slide nuts
126 HP = 32 slide nuts
168 HP = 42 slide nuts
196 HP = 49 slide nuts

DETAILS

• • 4 x eurorack rail with lip
  • 2 x black plastic side brackets to form a correctly sized frame and connect rails together
  • 8 x M5 bolts to fasten the rails to the side plates
  • 8 x woodscrew 3mm to fasten the rail set to your case
  • 4 x threaded inserts or set of sliding nuts

FRAME LENGTH

• 84 HP – 433mm
• 104 HP – 535mm
• 114 HP – 585mm
• 126 HP – 646mm
• 168 HP – 860mm
• 196 HP – 1002mm

FAQ
How many slide nuts will I get with rail set? 
We recommend to use one slide nut per every 4HP per rail:
84 HP = 84 slide nuts
104 HP = 104 slide nuts
114 HP = 114 slide nuts
126 HP = 126 slide nuts
168 HP = 168 slide nuts
196 HP = 196 slide nuts

IMPORTANT NOTE

• 1U section of this eurorack frame is made especially for Intellijel size 1U modules. Frame for standard 1U module sizes is available here: 1U Standard Size Frame

DETAILS

• 4 x eurorack rail with lip
• 2 x black plastic side brackets to form a correctly sized frame and connect rails together
• 8 x M5 bolts to fasten the rails to the side plates
• 6 x woodscrew 3mm to fasten the rail set to your case
• 4 x threaded inserts or set of sliding nuts

FRAME LENGTH

• 84 HP – 433mm
• 104 HP – 535mm
• 114 HP – 585mm
• 126 HP – 646mm
• 168 HP – 860mm
• 196 HP – 1002mm

FAQ
How many slide nuts will I get with rail set? 
We recommend to use one slide nut per every 4HP per rail:
84 HP = 84 slide nuts
104 HP = 104 slide nuts
114 HP = 114 slide nuts
126 HP = 126 slide nuts
168 HP = 168 slide nuts
196 HP = 196 slide nuts

IMPORTANT NOTE

• 1U section of this eurorack frame is made for standard (Pulp Logic) size 1U tile modules. Frame for Intellijel 1U module sizes is available here: 1U Intellijel Size Frame

DETAILS

• 4 x eurorack rail with lip
• 2 x black plastic side brackets to form a correctly sized frame and connect rails together
• 8 x M5 bolts to fasten the rails to the side plates
• 6 x woodscrew 3mm to fasten the rail set to your case
• 4 x threaded inserts or set of sliding nuts

FRAME LENGTH

• 84 HP – 433mm
• 104 HP – 535mm
• 114 HP – 585mm
• 126 HP – 646mm
• 168 HP – 860mm
• 196 HP – 1002mm

FAQ
How many slide nuts will I get with the rail set? 
We recommend to use one slide nut per every 4HP per rail:
84 HP = 84 slide nuts
104 HP = 104 slide nuts
114 HP = 114 slide nuts
126 HP = 126 slide nuts
168 HP = 168 slide nuts
196 HP = 196 slide nuts

DETAILS

• • 2 x eurorack rail with lip
  • 2 x black plastic side brackets to form a correctly sized frame and connect rails together
  • 4 x M5 bolts to fasten the rails to the side plates
  • 4 x woodscrew 3mm to fasten the rail set to your case
  • 2 x threaded inserts or set of sliding nuts

FRAME LENGTH

• 84 HP – 433mm
• 104 HP – 535mm
• 114 HP – 585mm
• 126 HP – 646mm
• 168 HP – 860mm
• 196 HP – 1002mm

FAQ
How many slide nuts will I get with rail set? 
We recommend to use one slide nut per every 4HP per rail:
84 HP = 42 slide nuts
104 HP = 52 slide nuts
114 HP = 57 slide nuts
126 HP = 63 slide nuts
168 HP = 84 slide nuts
196 HP = 98 slide nuts

IMPORTANT NOTE

• 1U section of this eurorack frame is made speccially for Intellijel size 1U modules. Frame for standard 1U module sizes is available here: 1U Standard Size Frame

DETAILS

• 2 x eurorack rail with lip
• 2 x black plastic side brackets to form a correctly sized frame and connect rails together
• 4 x M5 bolts to fasten the rails to the side plates
• 2 x woodscrew 3mm to fasten the rail set to your case
• 2 x threaded inserts or set of sliding nuts

FRAME LENGTH

• 84 HP – 433mm
• 104 HP – 535mm
• 114 HP – 585mm
• 126 HP – 646mm
• 168 HP – 860mm
• 196 HP – 1002mm

FAQ
How many slide nuts will I get with rail set? 
We recommend to use one slide nut per every 4HP per rail:
84 HP = 42 slide nuts
104 HP = 52 slide nuts
114 HP = 57 slide nuts
126 HP = 63 slide nuts
168 HP = 84 slide nuts
196 HP = 98 slide nuts

IMPORTANT NOTE

• 1U section of this eurorack frame is made for standard size 1U modules. Frame for Intellijel 1U module sizes is available here: 1U Intellijel Size Frame

DETAILS

• 2 x eurorack rail with lip
• 2 x black plastic side brackets to form a correctly sized frame and connect rails together
• 4 x M5 bolts to fasten the rails to the side plates
• 2 x woodscrew 3mm to fasten the rail set to your case
• 2 x threaded inserts or set of sliding nuts

FRAME LENGTH

• 84 HP – 433mm
• 104 HP – 535mm
• 114 HP – 585mm
• 126 HP – 646mm
• 168 HP – 860mm
• 196 HP – 1002mm

FAQ
How many slide nuts will I get with rail set? 
We recommend to use one slide nut per every 4HP per rail:
84 HP = 42 slide nuts
104 HP = 52 slide nuts
114 HP = 57 slide nuts
126 HP = 63 slide nuts
168 HP = 84 slide nuts
196 HP = 98 slide nuts

EURORACK MODULES FIXING

Besides rails, you will most likely also search for modules fixing to hold the modules securely in place. We’ve got you covered! Especially for that purpose, we have for you M3 Sliding Nuts or M3 Threaded Strips – all you need to do is to choose what is your preference.
A suitable size of screws to fix the modules to the rail (assuming a modules face plate thickness of 2mm) is an M3 x 6mm or M3 x 8mm if a washer is used. To prevent scratches on the modules front panels we recommend using Anti Rack Rash Screws.

INSTALLATION INSIDE EURORACK CASE

You can install rails inside your case in two ways:

• First – you can drill holes in your case and fix the rails to the case sides using M5 bolts – you can find a wide range of bolts to choose from in Eurorack Accessories.
• Second – this method is perfect for everyone who wants to be sure that eurorack rails are perfectly spaced and who prefer to avoid drilling holes in your case. Use our 3D printed side brackets – we manufacture them in all possible sizes: 1U (Pulp Logic standard) | 1U (Intellijel standard) | 3U | 4U (Pulp Logic standard) | 4U (Intellijel standard) | 6U

EURORACK RAILS LENGHT

• 84 HP – 427mm / 16.81″
• 104 HP – 529mm / 20.82″
• 114 HP – 579mm / 22.79″
• 126 HP – 640mm / 25.19″
• 168 HP – 854mm / 33.62″
• 196 HP – 996mm / 39.21″

IMPORTANT NOTE

• Listing price is per single 84HP Black Eurorack Rail

FAQ

“How many slide nuts should I use? “
We recommend to use at least one slide nut per every 4HP of eurorack rail:
84 HP = 21 slide nuts
104 HP = 26 slide nuts
114 HP = 29 slide nuts
126 HP = 32 slide nuts
168 HP = 42 slide nuts
196 HP = 49 slide nuts

IMPORTANT NOTE

• 1U section of this eurorack frame is made specially for Intellijel size 1U modules. Frame for standard 1U module sizes is available here: 1U Standard Size Frame

DETAILS

• 4 x eurorack rail with lip
• 2 x black plastic side brackets to form a correctly sized frame and connect rails together
• 8 x M5 bolts to fasten the rails to the side plates
• 6 x woodscrew 3mm to fasten the rail set to your case
• 4 x threaded inserts or set of sliding nuts

FRAME LENGTH

• 84 HP – 433mm
• 104 HP – 535mm
• 114 HP – 585mm
• 126 HP – 646mm
• 168 HP – 860mm
• 196 HP – 1002mm

FAQ
How many slide nuts will I get with rail set? 
We recommend to use one slide nut per every 4HP per rail:
84 HP = 84 slide nuts
104 HP = 104 slide nuts
114 HP = 114 slide nuts
126 HP = 126 slide nuts
168 HP = 168 slide nuts
196 HP = 196 slide nuts

IMPORTANT NOTE

• 1U section of this eurorack frame is made especially for Intellijel size 1U modules. Frame for standard 1U module sizes is available here: 1U Standard Size Frame

DETAILS

• 2 x eurorack rail with lip
• 2 x black plastic side brackets to form a correctly sized frame and connect rails together
• 4 x M5 bolts to fasten the rails to the side plates
• 2 x woodscrew 3mm to fasten the rail set to your case
• 2 x threaded inserts or set of sliding nuts

FRAME LENGTH

• 84 HP – 433mm
• 104 HP – 535mm
• 114 HP – 585mm
• 126 HP – 646mm
• 168 HP – 860mm
• 196 HP – 1002mm

FAQ
How many slide nuts will I get with rail set? 
We recommend to use one slide nut per every 4HP per rail:
84 HP = 42 slide nuts
104 HP = 52 slide nuts
114 HP = 57 slide nuts
126 HP = 63 slide nuts
168 HP = 84 slide nuts
196 HP = 98 slide nuts

IMPORTANT NOTE

• 1U section of this eurorack frame is made for standard size 1U modules. Frame for Intellijel 1U module sizes is available here: 1U Intellijel Size Frame

DETAILS

• 2 x eurorack rail with lip
• 2 x black plastic side brackets to form a correctly sized frame and connect rails together
• 4 x M5 bolts to fasten the rails to the side plates
• 2 x woodscrew 3mm to fasten the rail set to your case
• 2 x threaded inserts or set of sliding nuts

FRAME LENGTH

• 84 HP – 433mm
• 104 HP – 535mm
• 114 HP – 585mm
• 126 HP – 646mm
• 168 HP – 860mm
• 196 HP – 1002mm

FAQ
How many slide nuts will I get with rail set? 
We recommend to use one slide nut per every 4HP per rail:
84 HP = 42 slide nuts
104 HP = 52 slide nuts
114 HP = 57 slide nuts
126 HP = 63 slide nuts
168 HP = 84 slide nuts
196 HP = 98 slide nuts

Complete eurorack rails frameset to build a 6U section in the eurorack case. Simple assembly thanks to self-tapping screws, perfectly sized countersunk holes, and specially designed side brackets.

DETAILS

• • 4 x eurorack rails with lip
  • Side Brackets – 2 x 6U size black or silver aluminum side brackets or 4 x 3U black plastic or aluminum side brackets, to choose
  • 8 x M5 bolts to fasten the rails to the side plates
  • 8 x woodscrew 3mm to fasten the rail set to your case
  • 4 x threaded inserts or set of sliding nuts

FRAME LENGTH

• 84 HP – 433mm
• 104 HP – 535mm
• 114 HP – 585mm
• 126 HP – 646mm
• 168 HP – 860mm
• 196 HP – 1002mm

FAQ

• How many slide nuts will I get with the rail set?  We recommend to use one slide nut for every 4HP per rail:
  84 HP = 84 slide nuts
  104 HP = 104 slide nuts
  114 HP = 114 slide nuts
  126 HP = 126 slide nuts
  168 HP = 168 slide nuts
  196 HP = 196 slide nuts

IMPORTANT NOTE

• 1U section of this eurorack frame is made for standard (Pulp Logic) size 1U tile modules. Frame for Intellijel 1U module sizes is available here: 1U Intellijel Size Frame

DETAILS

• 4 x eurorack rail with lip
• 2 x black plastic side brackets to form a correctly sized frame and connect rails together
• 8 x M5 bolts to fasten the rails to the side plates
• 6 x woodscrew 3mm to fasten the rail set to your case
• 4 x threaded inserts or set of sliding nuts

FRAME LENGTH

• 84 HP – 433mm
• 104 HP – 535mm
• 114 HP – 585mm
• 126 HP – 646mm
• 168 HP – 860mm
• 196 HP – 1002mm

FAQ
How many slide nuts will I get with rail set? 
We recommend to use one slide nut per every 4HP per rail:
84 HP = 84 slide nuts
104 HP = 104 slide nuts
114 HP = 114 slide nuts
126 HP = 126 slide nuts
168 HP = 168 slide nuts
196 HP = 196 slide nuts

DETAILS

• • 2 x eurorack rail with lip
  • 2 x black plastic side brackets to form a correctly sized frame and connect rails together
  • 4 x M5 bolts to fasten the rails to the side plates
  • 4 x woodscrew 3mm to fasten the rail set to your case
  • 2 x threaded inserts or set of sliding nuts

FRAME LENGTH

• 84 HP – 433mm
• 104 HP – 535mm
• 114 HP – 585mm
• 126 HP – 646mm
• 168 HP – 860mm
• 196 HP – 1002mm

FAQ
How many slide nuts will I get with the frameset? 
We recommend to use one slide nut per every 4HP per rail:
84 HP = 42 slide nuts
104 HP = 52 slide nuts
114 HP = 57 slide nuts
126 HP = 63 slide nuts
168 HP = 84 slide nuts
196 HP = 98 slide nuts