196HP Eurorack Rail BLACK

24.71 (incl. VAT 29.90)

196HP Black Eurorack Rail (one piece) for building your DIY eurorack case. These aluminium rails are anodized to matt black color, as a result, they have a high-end, luxurious look.
Rails with a lip are well suited for holding eurorack modules in place in perfectly aligned horizontal lines.

196HP Black Eurorack Rail (one piece) for building your DIY eurorack case. These aluminium rails are anodized to matt black color, as a result, they have a high-end, luxurious look.  Rails are equipped with a lip – for that reason, they are well suited for holding eurorack modules in place in perfectly aligned horizontal lines.

EURORACK MODULES FIXING

Besides rails, you will most likely also search for modules fixing to hold the modules securely in place. We’ve got you covered! Especially for that purpose, we have for you M3 Sliding Nuts or M3 Threaded Strips – all you need to do is to choose what is your preference.
A suitable size of screws to fix the modules to the rail (assuming a modules face plate thickness of 2mm) is an M3 x 6mm or M3 x 8mm if a washer is used. To prevent scratches on the modules front panels we recommend using Anti Rack Rash Screws.

INSTALLATION INSIDE EURORACK CASE

You can install rails inside your case in two ways:

IMPORTANT NOTE

  • Listing price is per single 196HP Black Eurorack Rail

FAQ

“How many slide nuts should I use? “
We recommend to use at least one slide nut per every 4HP of eurorack rail:
84 HP = 21 slide nuts
104 HP = 26 slide nuts
114 HP = 29 slide nuts
126 HP = 32 slide nuts
168 HP = 42 slide nuts
196 HP = 49 slide nuts

Size HP

196HP

Size mm

996mm

Size in

39.21"

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Content missing